1ASFK02025-Front Driver Side Outer Tie Rod


Front Driver Side Outer Tie Rod DIY Solutions


This part replaces:

  • Moog ES3675
  • OE # 26100286
  • DIY Solutions SUS01974
Save 17%
List: $41.95 Save: $7.00
Part 1ASFK02025
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS01974

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

This outer tie rod end is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.


  • Fits LH (Driver Side) OUTER
  • Direct replacement
  • Built to strict quality control standards

NOTE: For 2002 Models, there were two different tie rod options available: 1st design (14mm thread) & 2nd design (16mm thread). This tie rod is correct for models with the 2nd design tie rods.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:43)
    • Pry off the hub cap with a flat blade screwdriver
    • Loosen the 35mm hub nut with the vehicle on the ground
    • Loosen the lug nuts
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:08)
    • Spray both ends of the outer tie rod with penetrating oil
    • Measure from the either end of the outer tie rod
    • Place a 26mm wrench on the larger nut
    • Place a 22mm wrench on the smaller nut
    • Break the 22mm nut free
    • Straighten the cotter pin with pliers and pull it through
    • Remove the nut with a 21mm socket from the wheel knuckle
    • Hit the wheel knuckle with a hammer
    • Twist off the outer tie rod
    • Remove the 22mm nut off the outer tie rod
  3. step : Installing the New Outer Tie Rod (3:08)
    • Mark where the 22mm nut was located on the old tie rod to the new tie rod
    • Screw on the nut
    • Twist the outer tie rod into place
    • Push the outer tie rod into the wheel knuckle
    • Measure and check the outer tie rod distance
    • Tighten the 21mm nut on the wheel knuckle
    • Insert and twist the cotter pin with a pair of pliers
    • Tighten the two nuts on the outer tie rod
  4. step : Reattaching the Wheel (4:33)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the hub nut to 103 ft/lbs
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Measuring Tape
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 26mm Wrench
  • 22mm Wrench
  • 10mm Wrench

Fits the following Makes:

Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Driver Side Outer Tie Rod
2003-2006Chevrolet SSR Chevrolet SSR Front Driver Side Outer Tie Rod
2002Chevrolet Trailblazer Chevrolet Trailblazer with 16mm Thread Tie Rods Front Driver Side Outer Tie Rod
2003-2009Chevrolet Trailblazer Chevrolet Trailblazer Front Driver Side Outer Tie Rod
2002Chevrolet Trailblazer EXT Chevrolet Trailblazer EXT with 16mm Thread Tie Rods Front Driver Side Outer Tie Rod
2003-2006Chevrolet Trailblazer EXT Chevrolet Trailblazer EXT Front Driver Side Outer Tie Rod
2002GMC Envoy GMC Envoy with 16mm Thread Tie Rods Front Driver Side Outer Tie Rod
2003-2009GMC Envoy GMC Envoy Front Driver Side Outer Tie Rod
2002GMC Envoy XL GMC Envoy XL with 16mm Thread Tie Rods Front Driver Side Outer Tie Rod
2003-2006GMC Envoy XL GMC Envoy XL Front Driver Side Outer Tie Rod
2004-2005GMC Envoy XUV GMC Envoy XUV Front Driver Side Outer Tie Rod
2003-2008Isuzu Ascender Isuzu Ascender Front Driver Side Outer Tie Rod
2002Oldsmobile Bravada Olds Bravada with 16mm Thread Tie Rods Front Driver Side Outer Tie Rod
2003-2004Oldsmobile Bravada Olds Bravada Front Driver Side Outer Tie Rod
2005-2009Saab 9-7X Saab 9-7X Front Driver Side Outer Tie Rod

Part Interchange

Brand Label Part Number
DIY Solutions SUS01974
General Motors 26100286
MOOG Chassis Products ES3675

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: SUS01974
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great product as usual
Great price, shipped fast, fit perfectly, and awesome install video. Only thing was on the video it said would need a 22mm wrench. Ended up needing a 15/16th and also used a 10in adjustable.
July 21, 2017
different size
Different size part would not work. 1A Auto refunded my money 100% very fast. I use 1AAuto alot for parts I need.They are a top shelf company.
October 10, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I already purchased an outer tie rod from oreilly and apparently they do not come with the nut that snugs against the inner tie rod. Do you sell that nut or could tell me what size it is because nobody seems to carry it? Oreilly called all around and i did the same to bo luck. Thanks
Chris S April 20, 2017
We do not offer this nut. You may need to search through an affiliated dealership parts website to find an OEM number, which may be used to cross reference for a better cost option.
Alex P April 20, 2017
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Front Driver Side Outer Tie Rod DIY Solutions-1ASFK02025 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.