Replaces

Chevy GMC Buick Olds Isuzu Saab Cooling System Service Kit 2 Piece Set - 1AEEK00820

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   2 Piece Set
  • Kit Includes:
      (1) Radiator Cooling Fan Clutch
      (1) Water Pump

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Air Intake Hose (0:42)
    • Remove the hose clamps from the air intake hose with a flat blade screwdriver
    • Remove the T30 Torx screw from the air box
    • Pull the air intake hose up and out
  2. step : Removing the Serpentine Belt (1:12)
    • Familiarize yourself with the route of the serpentine belt
    • Insert a 15mm socket and ratchet into the tensioner
    • Turn the socket and pull the belt over the center pulley
    • Release the tensioner
    • Pull the belt off by hand
  3. step : Removing the Radiator Fan Clutch (1:48)
    • Loosen the four 13mm bolts on the radiator fan
    • Tighten the 13mm bolts by hand
    • Insert a fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and loosen the clutch
    • Hold the pulley and twist the fan to start remove the fan clutch from the shaft
    • Remove the four 13mm bolts
    • Shake the fan to loosen it from the clutch
    • Hold on to the fan clutch and twist the water pump to remove the fan
    • Pull the fan and clutch up
    • Disconnect on the radiator fan wiring harnesses
    • Pry out the clip in the radiator fan
    • Reach behind the radiator fan and remove the radiator fan and clutch
  4. step : Installing the New Radiator Fan Clutch (5:12)
    • Place the clutch in the fan with the harness on the driver side
    • Place the radiator fan down in smooth side in front
    • Lower the fan and clutch down into place
    • Push the clutch out of the fan
    • Reconnect the wiring harnesses
    • Push the clip into the radiator fan
    • Pull the clutch up and back through the fan onto the water pump pulley
    • Turn the pulley to twist it back into the clutch
    • Line up the fan on the clutch
    • Insert and tighten the four 13mm bolts
    • Twist the clutch on as far as possible
    • Insert the fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and tighten the clutch
  5. step : Installing the Serpentine Belt (7:50)
    • Loop the belt around the crank shaft pulley
    • Bring it around the water pump
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Bring it around the belt tensioner
    • Pull the tensioner clockwise with the 15mm socket and ratchet
    • Release the tensioner
    • Make sure the belt is on the correct pulleys
  6. step : Installing the Air Intake Hose (9:06)
    • Insert the air intake hose into place
    • Tighten the two hose clamps with a flat blade screwdriver
    • Insert and tighten the T30 Torx bolt

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Fan Clutch Wrench

  • Star Drivers & Sockets

  • T30 Driver

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Products arrived on time and work wonderfully.
Best price, easy to order, working product, arrived on time. Installation was difficult, I would get the tool for the job.
May 25, 2018
Great product!
I watched the how-to video, gathered my tools and had the pump and clutch installed quickly with minimal cursing;). Great parts, identical visually to factory. Easy install.
July 10, 2018
The right parts
I have purchased from 1aauto a good bit and always happy with having the right parts the first time. I also enjoy that I receive the parts in a quick timely fashion
January 6, 2019
Correct parts at a great price
April 24, 2019
OEM Fit and finish
The fan clutch and water pump fit with OEM quality. Would recommend to others.
August 10, 2019
Exactly as described
The parts were exactly as described. The how-to videos are an immense help. Step by step instructions along w/ required tools for the job.
August 19, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2007Buick Rainier Buick Rainier L6 4.2L Cooling System Service Kit 2 Piece Set
2002-2009Chevy Trailblazer Chevy Trailblazer L6 4.2L Cooling System Service Kit 2 Piece Set
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT L6 4.2L Cooling System Service Kit 2 Piece Set
2002-2009GMC Envoy GMC Envoy L6 4.2L Cooling System Service Kit 2 Piece Set
2002-2006GMC Envoy XL GMC Envoy XL L6 4.2L Cooling System Service Kit 2 Piece Set
2004-2005GMC Envoy XUV GMC Envoy XUV L6 4.2L Cooling System Service Kit 2 Piece Set
2003-2008Isuzu Ascender Isuzu Ascender L6 4.2L Cooling System Service Kit 2 Piece Set
2002-2004Oldsmobile Bravada Olds Bravada L6 4.2L Cooling System Service Kit 2 Piece Set
2005-2007Saab 9-7X Saab 9-7X L6 4.2L Cooling System Service Kit 2 Piece Set
Part 1AEEK00820
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.