Replaces

Chevy Fog / Driving Light Passenger Side - 1ALFL00206

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Bumper Mounted
  • Replaces dealer part number: 15040362
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Fog Light (0:24)
    • Remove the 10mm bolt from the bracket
    • Remove the two 15mm bolts from the bracket
    • Remove the 7mm bolts from the four mounting locations on the fog light
    • Press the tab on the socket or disconnect the wiring harness
    • Turn the socket counterclockwise
    • Remove the fog light
  2. step : Installing the Fog Light (2:51)
    • Insert the fog light into place
    • Tighten the four 7mm bolts to the fog light mount
    • Pull the bulb straight out
    • Press the new bulb onto the socket
    • Turn the socket clockwise
    • Connect the wiring harness
    • Insert the bracket into place
    • Tighten the two 15mm bolts to the bracket
    • Tighten the 10mm bolt to the bracket
  3. step : Adjusting the Fog Light Beam (4:05)
    • To adjust the fog light, turn the screw clockwise to aim the beam low
    • Turn the screw counterclockwise to aim the beam high

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002 Chevy Avalanche 1500 Fog / Driving Light Passenger Side
  • 2003-2006 Chevy Avalanche 1500 with Lower Body Cladding Fog / Driving Light Passenger Side
  • 2002-2006 Chevy Avalanche 2500 Fog / Driving Light Passenger Side

This part replaces:

  • Partslink GM2593141
  • Hollander 116-2309
  • OE # 15040362
  • TYC 19-5587-00-1
  • DEPO 335-2019R-AS
Part #: 1ALFL00206

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:21 min)