Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Side Location:   Driver Side

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Bumper Mounted
  • Replaces dealer part number: 15040361
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Fog Light (0:24)
    • Remove the 10mm bolt from the bracket
    • Remove the two 15mm bolts from the bracket
    • Remove the 7mm bolts from the four mounting locations on the fog light
    • Press the tab on the socket or disconnect the wiring harness
    • Turn the socket counterclockwise
    • Remove the fog light
  2. step : Installing the Fog Light (2:51)
    • Insert the fog light into place
    • Tighten the four 7mm bolts to the fog light mount
    • Pull the bulb straight out
    • Press the new bulb onto the socket
    • Turn the socket clockwise
    • Connect the wiring harness
    • Insert the bracket into place
    • Tighten the two 15mm bolts to the bracket
    • Tighten the 10mm bolt to the bracket
  3. step : Adjusting the Fog Light Beam (4:05)
    • To adjust the fog light, turn the screw clockwise to aim the beam low
    • Turn the screw counterclockwise to aim the beam high

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket
  • 15mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002Chevy Avalanche 1500 Chevy Avalanche 1500 Fog / Driving Light Driver Side
2003-2006Chevy Avalanche 1500 Chevy Avalanche 1500 with Lower Body Cladding Fog / Driving Light Driver Side
2002-2006Chevy Avalanche 2500 Chevy Avalanche 2500 Fog / Driving Light Driver Side
Part #: 1ALFL00205


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:21 min)