Replaces
This part doesn’t fit a . Select from parts that fit.
Light Assembly Lifetime Warranty
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire fog light assembly on this 2002 Chevy Suburban. It's the same part in some of the process on these Suburbans from 2000 to 2006. We show you on the driver side, but the passenger side is the same procedure. The items you'll need include a new fog light from 1AAuto.com, a 10mm socket, and a ratchet.
To change your fog light bulb, you'll just reach in behind the fog light. Life up the tab on the harness, pull it free and twist your bulb out. Take your new bulb, twist it back in clockwise, and reconnect your harness.
Now, to replace your entire assembly, you want to disconnect this harness by pulling up the tab and pulling it free. Then you want to remove these two 10mm bolts up on top of the fog light. We'll just fast-forward as Don does that. Once those are removed, the fog light will pull down and out.
On the left is the old fog light; on the right is the new one from 1A Auto. You can see they're identical, and will fit exactly the same. Take your new fog light and push it back into place. Then replace those two 10mm screws. We'll fast-forward as Don does this. Reconnect your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
