This replacement egr tube or pipe is just what you need to get your emissions in good working order again! Anyone who has tried to work with an older EGR tube knows the problems that come when trying to replace them!

Over time from the hot and cold cycles of the engine and corrosive exhaust gases running through the egr tube, will cause the egr pipe to rust so badly that the tube will crumble in your hands if you try to move it. Also, many times when the EGR valve is replaced, these tubes are either frozen to the valve or the exhaust manifold making it impossible to remove them without twisting and breaking them off.

Now you have a great alternative to the dealer for replacing those damaged, rotted, or rusted out EGR tubes with a brand new tube. If your check engine light is coming on due to a bad EGR system and you know your EGR tube is the problem, you now have the solution!!

EGR Tube Specifications:

  • Length: 11.5"
  • Replaces dealer part numbers: 24506775
  • Brand new
  • Bolts between exhaust manifold and EGR Valve
  • Built to strict quality control standards

Note: For 2005 & 2006 Models this tube is only correct for models that have had been updated with the 07-09 EGR valve (TSB 06-06-04-008B). This tube will not work on 2005 & 2006 models with the original EGR valve.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Cover (0:45)
    • Remove the oil fill cap
    • Turn the bottom portion of the fill tube counter clockwise
    • Disconnect the EGR valve wiring harness
    • Lift the engine cover up and off
  2. step : Removing the EGR Tube (1:45)
    • Soak the bolts with rust penetrant for 5-10 minutes
    • Remove the three 10mm bolts from the EGR tube
    • Remove the EGR tube
  3. step : Installing the EGR Tube (3:26)
    • Insert the EGR tube into place
    • Tighten the three 10mm bolts to the tube
  4. step : Installing the Engine Cover (4:46)
    • Insert the engine cover onto the pegs on the engine
    • Connect the EGR valve wiring harness
    • Reinstall the oil fill tube
    • Reinstall the oil cap

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
the EGR tube was too short, and was therefore a big struggle to get it installed, so unlike the video (but that was for an Equinox, and mine is a Torrent, though same 3.4 engine??). Finally getting it installed, it does seem to be functioning properly.
January 31, 2018
6 months ago
Went in easy. Exact fit. Fast delivery.
Very happy with the speed that product came. Fit as its suppose to..........
September 3, 2017
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Chevy Equinox EGR Tube V6 3.4L with Updated Design EGR Valve
  • 2007-2009 Chevy Equinox EGR Tube V6 3.4L
  • 2006 Pontiac Torrent EGR Tube V6 3.4L with Updated Design EGR Valve
  • 2007-2009 Pontiac Torrent EGR Tube V6 3.4L

This part replaces:

  • OE # 12602507
  • Dorman 598-201
Part #: 1AEGT00017

Order must be placed by 4pm ET

How-to Video:

(05:28 min)