Replaces

Chevy Corvette Hood Lift Support - 1ABHS00110

Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Is your hood not staying open anymore? The problem could be the lift support mounted from the radiator support to the hood. These get weak over time and require replacing. No need to lose money at the dealer for this simple do it yourself replacement. Our lift supports are just what you need to allow your hood to stay open again!

Each hood strut has the following specifications:

  • 100% tested prior to leaving the factory
  • Gas-Charged
  • Built to strict quality control standards
  • Commonly called "Assist Rod" by GM
  • For models that use the single support design
    • Does not fit models that use the dual support design

Note:

It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Have a question about a product?How do I install this item. do I have to remove all of the brackets orjust the bolts on the end of the old support?
Tee H August 4, 2015
how do I install this item
Rahim A August 25, 2015
They pop off the little ball with a screwdriver. Very easy to install.
EDWARD V June 11, 2016
Like Edward V said, they pop off the little ball with a screwdriver. You do not have to remove the entire bracket.
T H September 14, 2017
Remove the old one by removing the clip top and bottom of the old supports. The new ones install right out of the box by pressing the ends over the existing ball top and bottom. The new clips are on the supports already and just spring over the ball.
James H January 10, 2018
Use a flathead screwdriver to lift up the caps and they will come off easily. Then the new ones snap on no need for screwdriver when putting them on only when taking off old ones
N A May 11, 2018
Year Make Model Description
1988Chevy Corvette Chevy Corvette Hood Lift Support for Models with 1 Hood Lift Support
1989-1996Chevy Corvette Chevy Corvette Hood Lift Support
Only 1 left in stock
Part #: 1ABHS00110


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout