Chevy Cobalt HHR Pontiac G5 Pursuit Steering & Suspension Kit 8 Piece Set TRQ PSA59028 - 1ASFK02820

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Strut & Spring Assemblies
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the top of the strut (1:07)
    • Lift the hood and secure it.
    • Remove the three 13 mm nuts in the engine bay securing the top of the strut.
    • Keep two of them loosely threaded just to keep the strut from flopping around while you work on the bottom half.
  2. step : Remove the wheels (1:37)
    • Use a 19 mm lug wrench to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  3. step : Remove the stabilizer link (2:03)
    • Use an 18 mm wrench and an 18 mm socket and ratchet to remove the stabilizer link.
    • A breaker bar can help get it loose, using the wrench to secure the back of the bolt.
  4. step : Remove the bottom of the strut (3:01)
    • Apply some penetrating oil to the two 18 mm nuts securing the strut to the steering knuckle.
    • Work the bolts out of the steering knuckle and strut.
    • Unthread the top two nuts and pull the strut down and out.
  5. step : Install the new strut (4:35)
    • Put the strut into place and thread one of the bolts through the bottom of the strut and the steering knuckle.
    • This secures the strut so you can secure the top three nuts.
    • Torque the two bolts at the bottom to 100 ft lbs.
    • Reassemble the stabilizer link.
    • Replace the wheel, using a star pattern on the lug nuts.
    • Torque the top three nuts to 20 ft lbs.
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Do not recommend
The ordering and shipping was fast, easy and quick. That is about all that was good. The struts seem to be inferior. The left strut is ok ,but the right one is annoyingly noisy. The threads on the links were terrible one was able to be rethreaded one is junk. The tie rods dont appear to be as sturdy as the originals. The pleasant surprise was that they had grease fittings.
February 27, 2017
Great value!
Great product! Great value! Would highly recommend A1 Auto to anyone looking for great products at an affordable price and have already sent a few friends your way! Thanks!
March 8, 2017
Awesome prices
Much cheaper than local auto parts stores like OReilly, autozone, etc.
September 13, 2017
The parts are great i had just one issue w/size on a couple parts but overall good
December 15, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What is the RPO code FE5 mean?
Robert P July 14, 2017
FE5 means that you have a performance handling suspension. SUSPENSION SYSTEM RIDE, HANDLING, PERFORMANCE (FE5)
Alex P July 14, 2017
Regular production options fe5 handling ride an performance style for the car
L I July 16, 2017
i dont know about the code, but change my front struts and springs with the preassembled kit was a breeze. O also changed the sway bars. my 2006 cobalt felt and rode great
Virginia C July 24, 2017
Year Make Model Description
2005-2010Chevy Cobalt Chevy Cobalt 8 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension) TRQ PSA59028
2006-2010Chevy HHR Chevy HHR 8 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension) (excluding SS Models) TRQ PSA59028
2007-2010Pontiac G5 Pontiac G5 8 Piece Set Steering & Suspension Kit TRQ PSA59028
2005-2006Pontiac Pursuit Pontiac Pursuit 8 Piece Set Steering & Suspension Kit TRQ PSA59028
Part 1ASFK02820
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA59028