• Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:59)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:31)
    • Hold the back side with locking pliers
    • Remove the 15mm socket
    • Repeat the process for the other nut
  3. step : Installing the Sway Bar Links (3:16)
    • Insert the sway bar link into place
    • Hold the hex with a 17mm wrench
    • Tighten the 15mm bolt
  4. step : Installing the Wheel (3:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 22mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 15mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2010-2011 Chevy Camaro 10 Piece Set Steering & Suspension Kit
  • 2012-2015 Chevy Camaro V6 3.6L 10 Piece Set Steering & Suspension Kit
  • 2012 Chevy Camaro V8 6.2L 10 Piece Set Steering & Suspension Kit (excluding Supercharged Models)

This part replaces:

  • Moog K750553
  • Moog EV800885
  • Moog ES800939
  • Dorman 522-061
  • Dorman 522-062
  • Dorman 522-063
  • Dorman 522-064
  • Hollander 512-00614L
  • Hollander 512-00613R
  • Hollander 512-00616L
  • Hollander 512-00615R
  • OE # 92243929
  • OE # 92243928
  • OE # 92236899
  • OE # 92236898
  • OE # 20951300
  • OE # 20951301
  • OE # 92227430
  • OE # 92241266
  • Moog K750552
  • Moog K621479
  • Moog K621478
  • Moog K621481
  • Moog K621480
Only 2 left in stock
Part #: 1ASFK04722

How-to Video:

(04:34 min)