Replaces

Chevy Camaro Radiator Dual Cooling Fan Assembly - 1ARFA00508

Our aftermarket cooling fan assemblies are some of the highest quality replacements on the market! This radiator fan assembly is a complete, ready to bolt on, direct replacement part.

Specifications:

  • New, not rebuilt, electric motor
  • Geometrically designed plastic blades for optimal circulation and uniform balance
  • Plastic shroud designed to ensure structural integrity and endurance for maximum performance
  • Performance tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Square plug 

Now you can buy a high quality cooling fan assembly that is built to strict quality control standards. It is a great replacement and has good cost savings over a dealer unit.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Air Intake (0:28)
    • Remove the oil cap
    • Remove the engine cover
    • Tighten the oil cap
    • Disconnect the MAF sensor
    • Unlatch the air box tabs
    • Loosen the air intake hose clamps
    • Disconnect the PCV hose
    • Remove the air intake
  2. step : Removing the Radiator Cooling Fan Assembly (1:35)
    • Unclip the hose from the top of the cooling fan
    • Remove the two 13mm bolts from the assembly
    • Disconnect the electrical connector
    • Pop the hose out of the cooling fan
    • Remove the cooling fan
  3. step : Installing the Radiator Cooling Fan Assembly (2:41)
    • Insert the new radiator fan into place
    • Tighten the hose and its clamp
    • Connect the electrical connector
    • Tighten the two 13mm bolts to the assembly
    • Clip the hose into the top of the fan
  4. step : Installing the Air Intake (3:48)
    • Place the intake hose on the intake manifold
    • Clip in the intake box
    • Tighten the hose clamps
    • Connect the MAF sensor
    • Connect the PCV breather hose
    • Remove the oil cap
    • Remove the engine cover
    • Tighten the oil cap

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
I was very pleased with the way the site was setup and easy to use. the part came in securely packaged and I used the 1A Auto video to help me install the part, which was very easy.
March 15, 2018
Purchased
5 months ago
Great
This item came as descripted. Was easy an quick to install.
July 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2010Chevy Camaro Chevy Camaro Radiator Dual Cooling Fan Assembly for Models with Square Plug
2011Chevy Camaro Chevy Camaro Radiator Dual Cooling Fan Assembly

This part replaces:

  • OE # 92218317
  • OE # 92237365
  • OE # 92218321
  • Partslink GM3115229
  • Hollander 674-00999, 674-01000
  • TYC 622350
  • DEPO 335-55067-000
Only 1 left in stock
Part #: 1ARFA00508


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:04 min)