Replaces

Chevy Camaro Control Arm with Ball Joint Pair - 1ASFK03363

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front Lower Rearward
  • Includes ball joint & bushings
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:50)
    • Loosen the five 22mm lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:22)
    • Remove the 21mm nut that holds the ball joint to the wheel spindle
    • Hold the ball joint stud with a 10mm wrench if necessary
    • Strike the spindle with a hammer to loosen the ball joint stud
    • Hold the bolt that attaches the control arm to the frame with a 21mm wrench
    • Remove the 21mm nut from the control arm
  3. step : Installing the Control Arm (4:21)
    • Line up the control arm
    • Slide the ball joint stud into the wheel spindle
    • Thread the 21mm nut onto the ball joint by hand
    • Line up the frame side of the control arm
    • Slide the 21mm bolt into the frame side of the control arm
    • Thread the 21mm nut onto the 21mm bolt by hand
    • Hold the ball joint stud with a 10mm wrench if necessary
    • Tighten the 21mm nut onto the ball joint stud
    • Tighten the ball joint nut to 30 foot-pounds of torque
    • Tighten the ball joint nut an additional 90 degrees
    • Support the wheel spindle with a jack
    • Tighten the 21mm nut on the frame end of the control arm
    • Tighten the 21mm nut to 37 foot-pounds
    • Tighten the nut an additional 120 degrees
    • Remove the jack from the spindle
  4. step : Installing the Wheel (6:49)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lowr the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 21mm wrench
  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2013Chevy Camaro Chevy Camaro Front Lower Rearward Control Arm with Ball Joint Pair
2014-2015Chevy Camaro Chevy Camaro LS Front Lower Rearward Control Arm with Ball Joint Pair
2014-2015Chevy Camaro Chevy Camaro LT Front Lower Rearward Control Arm with Ball Joint Pair
2014-2015Chevy Camaro Chevy Camaro SS Front Lower Rearward Control Arm with Ball Joint Pair
2014-2016Chevy Camaro Chevy Camaro ZL1 Front Lower Rearward Control Arm with Ball Joint Pair
Part #: 1ASFK03363


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:30 min)