Replaces

Chevy Camaro Caprice Brake Pads Front Nakamoto CD1404 - 1ABPS00516

This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Professional grade Ceramic Enhanced brake pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:29)
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Remove the T30 Torx bolt from the brake rotor
    • Remove the two 14mm slide bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Strike the rotor with a hammer if necessary
    • Pull off the rotor
    • Tap the pads out of the caliper bracket with a hammer
  3. step : Preparing the Brakes (3:33)
    • Pry the brake shims off the caliper bracket with a flat blade screwdriver
    • Clean the caliper bracket with a wire brush
    • Clean the shims with a wire brush
    • Apply brake grease to the caliper bracket
    • Press the shims onto the caliper bracket
    • Apply brake grease to the shims
    • Slide the guide pins out of the caliper bracket
    • Clean any old grease or debris off the guide pins
    • Apply grease to the guide pins
    • Slide the guide pins into the caliper bracket
    • Clean the hub surface with a wire brush
    • Apply grease to the hub surface
  4. step : Installing the Brakes (5:49)
    • Slide the rotor onto the hub backwards
    • Spray brake parts cleaner onto the back of the rotor
    • Install the rotor onto the hub normally
    • Spray brake parts cleaner onto the front of the rotor
    • Install the T30 Torx screw into the rotor
    • Put the caliper bracket into place
    • Install the two 18mm bolts into the bracket
    • Tighten the two 18mm bolts to 44 foot-pounds of torque
    • Tighten the 18mm bolts a further 90 degrees
    • Install the brake pads into the caliper brackets
    • Apply brake grease to the back of the brake pads
    • Release the brake caliper
    • Compress the caliper piston with pliers
    • Slide the caliper onto the bracket
    • Install the two 14mm guide pin screws into caliper
    • Hold the guide pins with pliers
    • Tighten the guide pin bolts to 20 foot-pounds
  5. step : Installing the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 144 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 17mm Socket
  • 14mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:05 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 17mm Socket
  • 14mm Socket
  • 22mm Socket



This part replaces:

  • Nakamoto CD1404

Vehicle Fit

  • 2010-2014 Chevy Camaro V6 3.6L Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2011 Chevy Caprice Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2012 Chevy Caprice V8 6.0L Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2013-2015 Chevy Caprice Front Premium Posi Ceramic Brake Pads Nakamoto
Part #: 1ABPS00516

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1404

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More