Chevy Buick Pontiac Front Strut & Spring Assembly Pair Monroe Quick-Strut 171661 - MNSSP00035

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

• Upper Strut Mount
• Strut Bearing
• Coil Spring
• Boot & Bumper Kit
• Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

• Application specific technology
• Restores factory ride height and feel
• Quicker installation time than bare strut assemblies
• Pre-assembled and no compression tool required
  • Includes new mount, bearing, coil spring, isolators, boot, and strut
• Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

step : Remove the wheel (0:45)

• Loosen the lug nuts
• Raise and secure the vehicle
• Remove the lug nuts and wheel.

step : Remove the bottom of the shock (1:02)

• Unbolt the two bottom bolts securing the shock.
• Use a breaker bar and a 21 mm socket and some penetrating oil.
• You might need a hammer to work the bolts out once you have removed the nuts.
• Use a pry bar to pry the spindle free from the strut

step : Remove the top of the strut (1:40)

• Pop the hood and secure it.
• Use your 13 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
• Pull the strut down and out.

step : Install the new strut (2:10)

• Work the strut into place and bolt in the top three 13 mm bolts
• Torque the three 13 mm nuts to 35-45 ft lbs
• Bolt in the bottom two nuts and bolts and torque to 100 ft lbs.

step : Replace the wheel (3:46)

• Put the wheel back on and hand tighten the lug nuts
• Lower the vehicle and torque the lug nuts to 100 ft lbs