Chevy Buick Pontiac Cadillac Olds Front Wheel Bearing & Hub Assembly Timken 513017k - TKSHF00008

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit



  • Brand New Timken Hub Assembly
  • Direct replacement
  • Replaces OE# 7470014
  • Fits RH or LH FRONT
  • Built to strict quality control standards

These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Hex Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
where does the metal ring w/ gasket go? front of bearing or rear? and where does the other gasket go?
John J October 24, 2015
Hey John, It depends on the application. see how your vehicle comes apart. they go on the back.
JOSEPH B October 25, 2015
Hello, Depending on the model application, you may need to use these items. These go on the backside of the hub area.
Brian F November 24, 2015
Year Make Model Description
1984-1989Buick Skyhawk Buick Skyhawk Front Wheel Bearing & Hub Assembly
1988-1997Buick Skylark Buick Skylark Front Wheel Bearing & Hub Assembly
1985-1987Buick Somerset Buick Somerset Front Wheel Bearing & Hub Assembly
1984-1988Cadillac Cimarron Cadillac Cimarron Front Wheel Bearing & Hub Assembly
1987-1996Chevy Beretta Chevy Beretta Front Wheel Bearing & Hub Assembly
1984-2004Chevy Cavalier Chevy Cavalier Front Wheel Bearing & Hub Assembly
1987-1996Chevy Corsica Chevy Corsica Front Wheel Bearing & Hub Assembly
1992-1998Oldsmobile Achieva Olds Achieva Front Wheel Bearing & Hub Assembly
1985-1991Oldsmobile Cutlass Calais Olds Cutlass Calais Front Wheel Bearing & Hub Assembly
1984-1987Oldsmobile Firenza Olds Firenza Front Wheel Bearing & Hub Assembly
1984Pontiac 2000 Pontiac 2000 Front Wheel Bearing & Hub Assembly
1985-1998Pontiac Grand Am Pontiac Grand Am Front Wheel Bearing & Hub Assembly
1984-1994Pontiac Sunbird Pontiac Sunbird Front Wheel Bearing & Hub Assembly
1995-2005Pontiac Sunfire Pontiac Sunfire Front Wheel Bearing & Hub Assembly
Only 2 left in stock
Part TKSHF00008
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: 513017k