Replaces

Chevy Buick Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit - 1APBS00027

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      5 Lug
      11.93 in. (303mm)
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Performance Brake Rotors
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 15251335
  • Fits 5 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:39)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:15)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a pry bar to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:24)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (2:58)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
  6. step : Installing the New Brake Rotor (3:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the 15mm bolts to 75 foot-pounds of torque
  7. step : Installing the New Brake Pads (4:21)
    • Push the brake pad slides into place
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the 13mm bolts to 30 foot-pounds
  8. step : Reattaching the Wheel (5:43)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Fasten on the lug nut covers with a 19mm socket
  9. step : Testing the Brakes (6:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 15mm Socket

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Fingers crossed
We went to the more expensive rotors with high hopes they last a little longer than all the others weve used. Living in the mountains is hard on the vehicles so hoping these last longer than the year the ones in the past have lasted.
February 2, 2018
Front brake rotors and pads
Watched the video, got the parts in short time, 1hr 30 min. ---done,.need to rent a tool for the back calipers to compress the piston. Good service and delivery notifications. I will use them again!.
February 26, 2018
Great part at a great price
I was having trouble breaking in the hills I live in and decided I need better discs and pads. I loved the price and they arrived a day earlier than I expected. I wouldnt have thought there was a big difference between dics and pads, but I now experience no brake fade or vibration. Great product. I will buy them again and I recommend these to family, friends and anyone wholl listen.
March 7, 2018
Brake kit 2012 Impala
Great quality, as always lightning fast shipment from 1A1 Auto. Cant say enough good things about this company. I will definitely be back to purchase auto parts as needed! Thanks, John..........
April 13, 2018
Great Purchase
Great purchase, my car runs so much more smoothly. Def worth the money and an overall cheaper price than most with the same quality.
March 25, 2019
Quality parts
I purchased these front breaks to replace a set I got from Napa that warped within a few weeks. They seem of very high quality but only time will tell. Not sure if they have more stopping power but I feel confident that they are safe and will stop the car when needed. One thing to note: this set does not include new slides. If you want new slides purchase them separately, I ended up reusing the old ones and they are fine. Be sure to clean and grease them before installing. This is also my first purchase from 1AAuto and I must say I’m pretty impressed. Fast shipping! Parts fit as they should and they even provide how-to videos. Great job!
April 23, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006-2008Buick Lucerne Buick Lucerne V6 3.8L Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit
2009-2011Buick Lucerne Buick Lucerne V6 3.9L Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit
2006-2013Chevy Impala Chevy Impala (without Police Package) Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit
2014-2016Chevy Impala Limited Chevy Impala Limited Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit
2006-2007Chevy Monte Carlo Chevy Monte Carlo Front Premium Posi Semi-Metallic Cross Drilled & Slotted Performance Brake Kit
Only 8 left in stock
Part 1APBS00027
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.