Replaces

Chevy Blazer S10 S10 Pickup Headlight Pair - 1ALHP00155

Specifications

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 16526217, 16526218
  • Includes lenses, housings, and mounting panels
  • Bulbs not included
These headlights are great replacements and have good cost savings over headlights from the dealer.
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

These lights do not include bulbs. Occasionally lighting manufacturers do leave test bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, Parking light, Fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:57)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To Replace the headlight bulbs or headlight assembly (0:58)
    • Open the hood and secure.
    • Pull up on the two tabs anchoring the head light assembly.
    • Unplug and replace the bulbs or unplug the harness to replace the head light assembly.
  3. step : Preliminarily aim your headlights (2:17)
    • Match the adjustor screws on the headlight assembly to match the old head light assembly.
  4. step : Install the headlight assembly. (3:00)
    • Plug in the harness and bulbs and line up your headlight assembly into place.
    • Push down the two tabs to anchor the head light assembly.
  5. step : Final aim of headlights (4:55)
    • Use a screwdriver to adjust the headlights.
    • The concentration of the beam should be 1 inch less than the height of the headlights on the vehicle 20 feet away, and straight on the high beams.
    • Close the hood and enjoy your new 1A Auto headlight assemblies and/or bulbs.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

3.6 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
1
0
1
Couldn't get much easier
Fit great, looks great. Really only took about 15 minutes to put in. Should have done it sooner
August 10, 2017
Purchased
7 months ago
Excellent service
Very much satisfied with this company. Had fast delivery and installation went smoothly. I would order again if I have to and the price was very reasonable.
January 6, 2018
Purchased
2 months ago
New headlights
These lights fit great and install was a breeze since all parts needed were inclued along with bulds. Would buy again
September 20, 2017
Purchased
5 months ago
Not quite perfect
Shipping was fast. Right side light assembly was perfect. Left side had one of the lower clips broken off and the turn signal bulb fitting was cut poorly. The bulb still fit and locked ( I hope ) and I installed it this spite of the short comings. Five stars for right side, one star for left.
September 3, 2017
Purchased
6 months ago
Headlight replacement parts 2003 Chevrolet S10
I was very excited about getting new headlights for my 2003 Chevrolet S10. The pictures for the product were exact replicas of the originals. When I got the product I found the headlights to be vastly different from the pictures and nowhere near even closely resembling a replica. Very disappointed 1aauto would sell an item of this quality. Items were sent back and I would not recommend anyone buy this product. Would have rated the product lower than 1 star if
I could have!
July 17, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
who was the manufacturer?
Eric B on Nov 3, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

How-to Video:

(06:11 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • OE # 16526217
  • OE # 16526218
  • Partslink GM2502172
  • Partslink GM2503172
  • Hollander 114-02715AL
  • Hollander 114-02715AR

Vehicle Fit

  • 1998-2005 Chevy Blazer S10 Headlight Pair
  • 1998-2004 Chevy S10 Pickup Headlight Pair
Part #: 1ALHP00155

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More