This replacement grille is just what you need to get your vehicle in good looking form again!

Specifications:

  • Chrome plated injection molded one piece plastic
  • Dark argent painted with chrome center strip
  • Mesh style
  • Can be painted by buyer to any colored desired or installed as is
  • High quality item that is built to strict quality control standards
  • Replaces dealer part number: 15048519
  • Direct bolt on
  • Has proper area for the Chevy emblem (not included)
  • Designed for Base and LS models but will fit all S10 models

Makes a great replacement and has substantial cost savings over a dealer unit.

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the head light (0:50)
    • Pull the two tabs up from the top of the assembly.
    • Take the headlight assembly and pull it out
    • Disconnect the wiring harness.
  2. step : Remove the parking light (1:19)
    • Unclips the parking light
    • Disconnect the bulb and set it aside.
  3. step : Remove the grille (1:52)
    • Unclip the grille, prying the tabs now exposed with your flat blade screwdriver.
    • Repeat the process on the other side of the vehicle.
    • If you are replacing the grille, transfer the tab style clips to the new grille from the old one.
  4. step : Install the grille (2:57)
    • Thread the harnesses through the parking light and head light gaps.
    • Clip the grille onto the front of the vehicle.
  5. step : install the lights (4:19)
    • Connect the parking light assembly up.
    • Clip it into place.
    • Connect the headlight assembly.
    • Insert the tabs, taking care not to pinch the wiring.
    • Once the assembly is in place, clip the two locking tabs in.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
grille
grille came in good condition ,looks great. fit pretty good had little difference on how it was to be fasten to radiator mounting brackets was able to get it into place
February 26, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2005 Chevy Blazer S10 Mesh Chrome & Dark Argent Grille
  • 1998-2004 Chevy S10 Pickup Mesh Chrome & Dark Argent Grille

This part replaces:

  • Partslink GM1200419
  • OE # 15048519
Part #: 1ABGR00056


How-to Video:

(06:40 min)