Replaces
Frequently bought together
Part Details
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Direct Fit Replacement - Guaranteed to fit and function for your specific application
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a front engine torque strut mount on this 2003 Chevy Monte Carlo. We show you on the mount on the driver's side, but the passenger's side has the same part and the same procedure. The items you'll need for this includes a new front engine mount from 1AAuto.com, and a 13mm and 15mm socket and ratchet, and a 15 mm wrench.
The mount is held in with a 15mm bolt and three 13mm bolts. For the 15 mm bolt, you're going to need a wrench on one side and your socket and ratchet on the other. Then you can just remove the 13mm bolts. Once those are removed, the mount just pulls free.
On the left is the old engine mount; on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Put your new front engine torque strap mount into place and put the bolt through it. Push it down. Then replace those three 13mm bolts and tighten them up. Replace the nut on the 15mm bolt and tighten that up. Once they're all tightened up, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
