1ASFK01169-Chevrolet GMC Steering & Suspension Kit 10 Piece Set


Chevrolet GMC Steering & Suspension Kit 10 Piece Set TRQ PSA58731


Part Details

  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Moog ES2836RL
  • Moog ES2837RL
  • Moog K6292
  • Moog K6293
  • Moog K6335
  • Moog K6390
  • OE # 26016461
  • OE # 26051896
Save 29%
List: $139.95 Save: $40.00
Part 1ASFK01169
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA58731
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Upper Ball Joints
      (1) Idler Arm
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. step : Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. step : Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. step : Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. step : For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have an 89 gmc suburban, 4x4 and has a lift on it. I think maybe a 4" lift. Will this set help me rebuild the steering components or do I need a specific set because the lift that I have?
Cauner J May 23, 2017
Our parts are made to be used on factory applications up to a 2" lift. Anything more will require parts made for a lift.
Tim K May 24, 2017
I have a 92 silverado with 6" bds lift,, all the parts fit fine, just keep in mind these are not moog, so they wont hold up as long.
Jason M January 9, 2018
Parts will work fine. Lift isnt a concern. Plenty of rod on the tierod to suffice.
Jim G October 23, 2018
It does come with a self ajusting link... But it may not extend that far..
B L November 13, 2018
Have buy set up for your vehicle. I have 4 inch lift and mine fit just fine with it
R O December 8, 2018
They will fit just fine.
B O December 12, 2018
First thing you should do is ask for specific parts..Lots of part angles change with a suspension lift..If its a body lift only..most suspension parts will fit with no problem..drive line lifts will change angles, mounts and even parts..If your not a pro on lifts..consult with one..Just putting parts on wont mean they are correct..Dont put yourself , your rig and the public at risk thru installing improper or inadequate parts..my motto is..ask a dumb question..Its better than a stupid mistake...
F O February 16, 2019
96 Yukon 4x4 3inch lift and everything went right on.
J E February 16, 2019

Fits the following Makes:

Year Make Model Description
1988-1992Chevrolet C1500 Truck Chevrolet C1500 Truck Steering & Suspension Kit 10 Piece Set
1988-1992Chevrolet C2500 Truck Chevrolet C2500 Truck 7200LB GVW with 6 Lug Wheels Steering & Suspension Kit 10 Piece Set
1992Chevrolet Suburban C1500 Chevrolet Suburban C1500 Steering & Suspension Kit 10 Piece Set
1988-1992GMC C1500 Truck GMC C1500 Truck Steering & Suspension Kit 10 Piece Set
1988-1992GMC C2500 Truck GMC C2500 Truck 7200LB GVW with 6 Lug Wheels Steering & Suspension Kit 10 Piece Set
1992GMC Suburban C1500 GMC Suburban C1500 Steering & Suspension Kit 10 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS00096
DIY Solutions SUS00104
DIY Solutions SUS05335
DIY Solutions SUS06354
DIY Solutions SUS07324
DIY Solutions SUS07325
General Motors 26051896
General Motors 26016461
MOOG K6293
MOOG K6335
MOOG K6390
MOOG K6292
MOOG Chassis Products K6390
MOOG Chassis Products ES2837RL
MOOG Chassis Products ES2836RL
MOOG Chassis Products K6293
MOOG Chassis Products K6292
MOOG Chassis Products K6335

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA58731
Product Reviews
4.40/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
88 Chevy
Parts arrived within time that were scheduled to arrive all parts where exact fit for truck good quality parts
May 13, 2018
Parts ordered
We needed to change out front top and bottom ball joints on our 1992 Chevy 1500 truck. Instead of getting the ball joints we were offered a complete set for front suspension at a very good low price. We received the order in a good timely matter. Thank you A1.
October 31, 2018
Good product for the price.
I ordered a complete rebuild kit for my 90 GMC C1500. Price was definitely in my range. Went together great. Only thing I didnt like was the rubber seal for the lower ball joints was not kept in place with any kind of retainer. None of the ball joints had grease certs and didnt have enough grease.
February 11, 2019
good product for a great price.
bought this kit for my 1990 gmc. everything fit like it should and took care of my front end slop. would recommend to anyone.
February 19, 2019
Good job
I liked the product. Everything went together perfect I would recommend it. Great work
November 6, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet GMC Steering & Suspension Kit 10 Piece Set TRQ PSA58731-1ASFK01169 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.