Replaces

Chevrolet GMC Cadillac Front & Rear Semi-Metallic Brake Pads

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Specifications:

  • Premium Posi Semi Metallic Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Remove wheel. (1:22)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (2:00)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (7:45)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. step : Put wheel back on (12:50)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (13:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002Cadillac Escalade Cadillac Escalade All Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2003-2004Cadillac Escalade Cadillac Escalade All Wheel Drive Front & Rear Semi-Metallic Brake Pads
2005-2006Cadillac Escalade Cadillac Escalade Front & Rear Semi-Metallic Brake Pads
2003-2004Cadillac Escalade ESV Cadillac Escalade ESV All Wheel Drive Front & Rear Semi-Metallic Brake Pads
2005-2006Cadillac Escalade ESV Cadillac Escalade ESV Front & Rear Semi-Metallic Brake Pads
2002Cadillac Escalade EXT Cadillac Escalade EXT All Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2003-2004Cadillac Escalade EXT Cadillac Escalade EXT All Wheel Drive Front & Rear Semi-Metallic Brake Pads
2005-2006Cadillac Escalade EXT Cadillac Escalade EXT Front & Rear Semi-Metallic Brake Pads
2002Chevrolet Avalanche 1500 Chevrolet Avalanche 1500 4 Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2003-2006Chevrolet Avalanche 1500 Chevrolet Avalanche 1500 4 Wheel Drive Front & Rear Semi-Metallic Brake Pads
2002Chevrolet Silverado 1500 Chevrolet Silverado 1500 with Quadrasteer Front & Rear Semi-Metallic Brake Pads
2003-2006Chevrolet Silverado 1500 Chevrolet Silverado 1500 with Dual Piston Rear Calipers Front & Rear Semi-Metallic Brake Pads
2007Chevrolet Silverado 1500 Classic Chevrolet Silverado 1500 Classic with Dual Piston Rear Calipers Front & Rear Semi-Metallic Brake Pads
2000-2002Chevrolet Suburban 1500 Chevy Suburban 1500 Front & Rear Premium Posi Semi-Metallic Brake Pads Nakamoto Nakamoto
2003-2006Chevrolet Suburban 1500 Chevy Suburban 1500 Front & Rear 4 Wheel Drive Premium Posi Semi-Metallic Brake Pads Nakamoto Nakamoto
2000Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Limited Slip Rear Axle (without Z71 Package) Front & Rear Semi-Metallic Brake Pads
2001-2002Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2003-2006Chevrolet Tahoe Chevrolet Tahoe 4 Wheel Drive Front & Rear Semi-Metallic Brake Pads
2002GMC Sierra 1500 GMC Sierra 1500 with Quadrasteer Front & Rear Semi-Metallic Brake Pads
2003-2006GMC Sierra 1500 GMC Sierra 1500 with Dual Piston Rear Calipers Front & Rear Semi-Metallic Brake Pads
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic with Dual Piston Rear Calipers Front & Rear Semi-Metallic Brake Pads
2000GMC Yukon GMC Yukon SLE 4 Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2000GMC Yukon GMC Yukon SLE Rear Wheel Drive Front & Rear Semi-Metallic Brake Pads
2000GMC Yukon GMC Yukon SLT 4 Wheel Drive Limited Slip Rear Axle Front & Rear Semi-Metallic Brake Pads
2000GMC Yukon GMC Yukon SLT Rear Wheel Drive Front & Rear Semi-Metallic Brake Pads
2001-2002GMC Yukon GMC Yukon 4 Wheel Drive Front & Rear Semi-Metallic Brake Pads
2003-2006GMC Yukon GMC Yukon 4 Wheel Drive Front & Rear Semi-Metallic Brake Pads
2000-2002GMC Yukon XL 1500 GMC Yukon XL 1500 Front & Rear Semi-Metallic Brake Pads
2003-2006GMC Yukon XL 1500 GMC Yukon XL 1500 4 Wheel Drive Front & Rear Semi-Metallic Brake Pads

Part Interchange

Brand Label Part Number
DIY Solutions BFS00739
Raybestos EHT834H
Raybestos EHT785H
Raybestos Brakes EHT834H
Raybestos Brakes EHT785H

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
There are no reviews for this item.
Part 1ABFS02204
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA12988