Part Details
-
Quantity:
8 Piece
-
Kit Includes:
(2) Front Lower Ball Joints
(2) Front Upper Control Arms with Ball Joints
(2) Front Outer Tie Rods
(2) Front Inner Tie Rods
Specifications:
- Brand New Suspension Kit
- Comes as an 8 Piece Kit
- Fits LH (Driver Side) & RH (Passenger Side)
- Direct replacements
- Built to strict quality control standards
Should You Purchase This 8-Piece Steering & Suspension Kit?
Does the steering on your vehicle feel loose or sloppy? Are there clunking noises coming from your vehicle's front end? Those are the symptoms of worn steering parts. If you have signs of bad steering parts, you'll want to replace them right away. To find out what parts need to be replaced, you can raise the front end of your car and try moving the parts by hand. You'll want to replace any part that has noticeable play.
It's a good idea to replace steering parts in sets. Since they're all subject to the same elements, you can refresh the whole front end at once. Tracking down each individual part can make it time consuming and costly. Lucky for you, we've collected together control arms, ball joints, and tie rod ends for you into a convenient aftermarket steering and suspension kit.
Replacing steering parts is relatively a simple process. You may need to support the truck and remove the front wheels to get better access to the suspension. You’ll want to measure the old parts before installing the new ones, so you can set them properly. Then unbolt the parts and bolt on the new ones. You should always get a professional alignment after working on your steering.
These suspension parts are high quality direct fit replacements, guaranteed to fit the listed models. This kit fits a number of GM models from 2007-2014, including the Chevy Silverado and Tahoe, GMC Sierra and Yukon, and Cadillac Escalade. This kit is specifically for models that came with stamped steel lower control arms. For more fit info, check the "Vehicle Fit" tab. 1A Auto's steering and suspension parts use he same high quality materials, precision manufacturing, and rigorous testing as the original equipment.
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Application Specific Design: No modifications necessary
Anti-Corrosion Coated: Enhanced surface life
Pre-greased: No additional maintenance required
Kitted for Restored Performance: Improved road-feel and handling Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.