1ASFK04335-Chevrolet GMC Buick Saturn 8 Piece Steering & Suspension Kit
false

Replaces

Chevrolet GMC Buick Saturn 8 Piece Steering & Suspension Kit TRQ


07-13 Acadia; 07-10 Outlook; 08-13 Enclave; 09-13 Traverse Steering & Suspension Kit (8 Piece)
$ 274.95
$381.95
28% OFF
$381.95
28% OFF
FREE SAME DAY SHIPPING
TRQ
PSA59640
In Stock
Part 1ASFK04335

Orders must be placed by 2pm ET
Part 1ASFK04335
In Stock
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   8 Piece
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Strut & Spring Assemblies

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 8
  • Direct replacements
  • Built to strict quality control standards

Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount.  Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.

Strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut

Install Tip: When replacing steering components, have a professional alignment performed afterwards.  This ensures proper tracking and even tire wear.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

No modifications, all the parts needed in one kit
Direct fit - easy install, pre-greased, no maintenance required
Improved ride comfort and longer life

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace Strut Assembly 08-12 Buick Enclave

Created on: 2014-12-04

Watch this video to learn how to replace the front struts on your 08-12 Buick Enclave.

  1. It's recommended to seek an alignment after finishing this repair

    step 1 : Removing the Wheel
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step 2 : Removing the Wiper Arm
    • Pry off the wiper arm cap with a flat blade screwdriver
    • Remove the 15mm nut from the wiper arm
    • Remove the wiper arm
    • Repeat the process for the other side
  3. step 3 : Removing the Cowl Panel
    • Remove the four clips along the cowl panel with a flat blade screwdriver
    • Remove the ground from the cowl panel
    • Pry off the clip near the edge of the windshield
    • Pry off the adhesive pad on either end of the cowl panel
    • Pry off the clip on the driver side of the cowl panel
    • Pull up on the cowl panel to release it from its clips
    • Pull the cowl panel up and off
  4. step 4 : Removing the Front Strut
    • Spray the lower and higher strut bolts with rust penetrant
    • Remove the three of the upper 15mm strut bolts and leave the last one loosened
    • Pry out the clip holding the brake line to the strut with a flat blade screwdriver
    • Remove the 18mm nut from the stabilizer link
    • Pull the stabilizer link aside
    • Remove the two 24mm nuts from the bottom of the strut and knuckle
    • Pry the wiring harness off of the strut
    • Thread the 24mm nuts onto the bolts and hammer them to move the bolts
    • Jack up underneath the knuckle
    • Remove the two bolts from the knuckle
    • Pull the strut off the steering knuckle
    • Remove the last 15mm bolt from the strut
    • Remove the strut
  5. step 5 : Disassembling the Strut
    • Place the spring compressors on either side of the spring
    • Tighten each back and forth a little while alternating sides
    • Remove the spark plug piece from a 13/16 spark plug socket with a 90-degree pick
    • Remove the nut at the top of the strut with a 7/8 wrench and 13/16 spark plug socket
    • Pull the mount plate from the top of the strut free
    • Remove the spring
    • Pull the boot up and off
  6. step 6 : Assembling the Strut
    • Remove the nut from the new strut
    • Replace the boot
    • Insert the spring into its notch on the strut
    • Tighten the bolt onto the new strut
    • Loosen each of the compressors bit by bit while alternating sides
    • Repeat until the spring compressors pull free
  7. step 7 : Inserting the Front Strut
    • Insert the strut into place
    • Push down on the knuckle and place the strut behind it
    • Push the strut onto the knuckle
    • Insert the bolts into the bottom of the strut and knuckle
    • Hammer the bolts in and tighten them
    • Torque the bolts to 120 foot-pounds
    • Jack up the strut into place
    • Replace the upper 15mm strut bolts by hand
    • Insert the harness clip in place on the new strut
    • Insert the clip holding the brake line
    • Insert the stabilizer link in place
    • Tighten the 18mm nut to the link
  8. step 8 : Reattaching the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the three 15mm bolts at the top of the strut
    • Tighten the lug nuts to 45 foot-pounds
  9. step 9 : Reinstalling the Cowl Panel
    • Insert any remaining clips into the cowl panel
    • Insert the cowl panel into place
    • Insert the adhesive on either side of the panel
    • Push in the clips along the cowl panel
    • Push on the clip near the edge of the windshield
    • Push in the clip on the driver side of the cowl panel
    • Replace and tighten the ground
  10. step 10 : Reinstalling the Wiper Arm
    • Push the wiper arm onto the stud
    • Tighten the 15mm nut to the wiper arm
    • Replace the wiper arm cover
    • Repeat the process for the other side

Tools needed for replacement

  • General Tools

    Jack Stands

    Pick

    Floor Jack

  • Ratchets & Related

    Torque Wrench

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    24mm Socket

    15mm Socket

    18mm Socket

    21mm Socket

    8mm Socket

    22mm Socket

  • Sockets - SAE

    13/16 Inch Spark Plug Socket

  • Specialty Tools

    Strut Spring Compression Tool

  • Wrenches - Metric

    18mm Wrench

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2008-2012Buick Enclave Buick Enclave 8 Piece Steering & Suspension Kit
2009-2012Chevrolet Traverse Chevrolet Traverse 8 Piece Steering & Suspension Kit
2007-2012GMC Acadia GMC Acadia 8 Piece Steering & Suspension Kit
2007-2010Saturn Outlook Saturn Outlook 8 Piece Steering & Suspension Kit

Part Interchange

Brand Label Part Number
DIY Solutions SUS03283
DIY Solutions SUS06920
DIY Solutions SUS07886
DIY Solutions SUS00339
Gabriel G57109
General Motors 15863690
General Motors 15869897
General Motors 20905104
KYB SR4206
KYB Shocks & Struts SR4206
MOOG ES800286
MOOG K750155
MOOG K500088
MOOG Chassis Products ES800286
MOOG Chassis Products K500088
MOOG Chassis Products K750155
Mevotech MS50516
Mevotech MS50832
Mevotech MS50606
Monroe 172518
Monroe 182518
Monroe Shocks & Struts 182518
Monroe Shocks & Struts 172518
Unity Automotive 11680

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

TRQ
PSA59640
In Stock
Part 1ASFK04335
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Buick Saturn 8 Piece Steering & Suspension Kit TRQ-1ASFK04335 does not fit your:



Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.