1AEBT00044-Chevrolet Buick Pontiac Serpentine Belt Tensioner Assembly

Replaces

Chevrolet Buick Pontiac Serpentine Belt Tensioner Assembly Dorman 419-014

1AEBT00044
FREE SAME DAY SHIPPING
Save 27%
List: $143.95 Save: $39.00
Only 2 left in stock
Part 1AEBT00044
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Dorman
Brand #: 419-014

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Heater Hose Elbows

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

How to Replace Serpentine Belt Tensioner with Heater Hose Elbows 00-05 Chevy Impala

Created on: 2014-02-14

Watch this video for a replacement that can cure a common low coolant problem in 00-05 Chevy Impalas.

  1. step 1: Disconnect the battery
    • Disconnect the negative battery cable using your 8mm wrench
  2. step 2: Move the coolant tank out of the way
    • Start out by removing the two 13 mm bolts that hold the strut brace on the passenger's side
    • Remove the two 10 mm bolts using your socket and ratchet.
    • Pull the coolant tank out and set to the side; there’s no need to disconnect it, just take care not to spill any coolant.
  3. step 3: Loosen the alternator and tensioner
    • Remove the 15 mm nut on the top of the alternator.
    • Remove the oil cap.
    • Pull off the cover.
    • Use a 3/8 ratchet to release the tension on the serpentine belt and remove the belt.
    • Remove the three 15 mm bolts securing the belt tensioner.
    • Pull the alternator and tensioner pulleys out of the way a bit and remove the coolant elbow.
    • Remove the old O rings and any debris from the old coolant elbows.
  4. step 4: Install the new coolant elbows.
    • Use some penetrating oil to help seat the O rings and install the new coolant elbows.
    • Bolt the tensioner and alternator in place.
    • Put the serpentine belt back on, using a ratchet handle on the tensioner to get it onto the pulleys.
    • Put the cover and oil cap back on.
    • Use a 10 mm and 13 mm sockets and ratchet to bolt the coolant tank back in place.
    • Reconnect the battery using an 8 mm socket and ratchet or wrench.

Tools needed for replacement

  • General Tools

    Drain Pan

    Funnel

  • Ratchets & Related

    Ratchet

    Socket Extensions

  • Sockets - Metric

    13mm Socket

    10mm Socket

    15mm Socket

    8mm Socket

  • Specialty Tools

    Bent Tipped Awl

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2005-2008Buick Allure Buick Allure V6 3.8L Serpentine Belt Tensioner Assembly
2005-2009Buick LaCrosse Buick LaCrosse V6 3.8L Serpentine Belt Tensioner Assembly
2000-2005Buick LeSabre Buick LeSabre V6 3.8L Serpentine Belt Tensioner Assembly
2006-2007Buick Lucerne Buick Lucerne V6 3.8L Serpentine Belt Tensioner Assembly
2000-2005Buick Park Avenue Buick Park Avenue V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2005Buick Park Avenue Buick Park Avenue V6 3.8L Serpentine Belt Tensioner Assembly
1996-2004Buick Regal Buick Regal V6 3.8L Serpentine Belt Tensioner Assembly
1996-2004Buick Regal Buick Regal V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
1999Buick Riviera Buick Riviera V6 3.8L Serpentine Belt Tensioner Assembly
1999Buick Riviera Buick Riviera V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2005Chevrolet Impala Chevrolet Impala V6 3.8L Serpentine Belt Tensioner Assembly
2004-2005Chevrolet Impala Chevrolet Impala V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2005Chevrolet Monte Carlo Chevrolet Monte Carlo V6 3.8L Serpentine Belt Tensioner Assembly
2004-2005Chevrolet Monte Carlo Chevrolet Monte Carlo V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2005Pontiac Bonneville Pontiac Bonneville V6 3.8L Serpentine Belt Tensioner Assembly
2000-2003Pontiac Bonneville Pontiac Bonneville V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2007Pontiac Grand Prix Pontiac Grand Prix V6 3.8L Supercharged Serpentine Belt Tensioner Assembly
2000-2008Pontiac Grand Prix Pontiac Grand Prix V6 3.8L Serpentine Belt Tensioner Assembly

Part Interchange

Brand Label Part Number
DIY Solutions BEP00040

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Dorman
Brand #: 419-014
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
proper install
August 14, 2016
I found after doing three of these type of jobs it is very easier to completely remove the alternator in order to install the tensioner. Also not shown in the video is to completely clean the sockets that the elbows go into. This can only be done with complete removal of tensioner. A repair video like this must show this procedure otherwise the person doing it will have a comeback due to improper install ( leaks )
1A auto is always my 1st choice.
January 1, 2019
I always look at 1A auto when looking for my automotive parts needs. Seems like I can always find what I am looking for. I love your videos also. You make my life easier and I do recommend you often. You deliver!!! Thanks for all that your staff do for the public. Larry
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this part come with the heater hose fittings not the coolant bypass elbows?
September 18, 2016
10
This part comes with the heater hose elbows as pictured.
September 20, 2016
10
No. I had to transfer the heater hose fittings from the old Pulley.
September 20, 2016
10
comes with elbows NO hose fittings
September 21, 2016
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Buick Pontiac Serpentine Belt Tensioner Assembly Dorman 419-014-1AEBT00044 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.