1ASFK02865-Chevrolet Buick Pontiac Olds Steering Kit 6 Piece Set


Chevrolet Buick Pontiac Olds Steering Kit 6 Piece Set TRQ PSA58511


Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Steering Rack & Pinion Bellows
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 6 Piece Set

This part replaces:

  • Moog EV195
  • Moog ES3459
  • Moog K6298
  • OE # 26056811
  • OE # 26086580
  • OE # 26021769
Save 17%
List: $59.95 Save: $10.00
Part 1ASFK02865
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA58511

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Front Outer Tie Rods
      (2) Steering Rack & Pinion Bellows
      (2) Front Inner Tie Rods


  • Brand New Steering Kit
  • Comes as a 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:45)
    • Remove the lug nut covers with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:18)
    • Twist the cotter pin out of the tie rod nut with needle nose pliers
    • Remove the 18mm nut from the tie rod
    • Measure from the boot of the inner tie rod to the center of the outer tie rod
    • Note this measurement
    • Loosen the 7/8 inch nut that holds the inner to the outer tie rod
    • Thread the 18mm nut onto the tie rod slightly
    • Strike the tie rod with a hammer to loosen it from the spindle
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:32)
    • Attach the grease fitting to the new outer tie rod
    • Tighten the grease fitting with a 7mm socket and ratchet
    • Twist the outer tie rod onto the inner tie rod
    • Push the tie rod into the spindle
    • Thread the 18mm nut onto the tie rod
    • Measure the distance from the boot to the center of the tie rod
    • This measurement should match the one taken in Step 2
    • Adjust the tie rod as necessary
    • Tighten the 18mm nut
    • Put the cotter pin through the 18mm nut and fold it over with needle nose pliers
    • Hold the nut that connects the inner to the outer tie rod with a 7/8 inch wrench
    • Turn the inner tie rod with a 13mm wrench
    • Add grease to the grease fitting with a grease gun
  4. step : Reattaching the Wheel (3:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Put on the hub cap, lining up the hole with the valve stem
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Measuring Tape

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 22mm Wrench

  • Wrenches - SAE

  • 7/8 Inch Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this fit a 2009 Chevy impala police car ?
Joseph S December 20, 2017
This will fit a 2009 Chevy Impala which does not have the RPO code FE4. With police or taxi models, the suspension in most cases is more heavy duty and requires special parts. Please check your vehicle for the appropriate RPO codes.
Alex P December 20, 2017

Fits the following Makes:

Year Make Model Description
1997-2005Buick Century Buick Century Steering Kit 6 Piece Set
2005-2009Buick LaCrosse Buick LaCrosse Steering Kit 6 Piece Set
1997-2004Buick Regal Buick Regal Steering Kit 6 Piece Set
2000-2003Chevrolet Impala Chevrolet Impala Steering Kit 6 Piece Set
2004-2013Chevrolet Impala Chevrolet Impala without RPO Code FE4 (Special Ride & Handling Suspension) Steering Kit 6 Piece Set
2014-2016Chevrolet Impala Limited Chevrolet Impala Limited without RPO Code FE4 (Special Ride & Handling Suspension) Steering Kit 6 Piece Set
2000-2007Chevrolet Monte Carlo Chevrolet Monte Carlo Steering Kit 6 Piece Set
1998-2002Oldsmobile Intrigue Olds Intrigue Steering Kit 6 Piece Set
2004-2008Pontiac Grand Prix Pontiac Grand Prix Steering Kit 6 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS07340
DIY Solutions SUS07392
DIY Solutions SUS07785
General Motors 26021769
General Motors 26056811
General Motors 26086580
MOOG K6298
MOOG Chassis Products ES3459
MOOG Chassis Products EV195
MOOG Chassis Products K6298

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA58511
Product Reviews
4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good value. Fast shipping.
My only complain is that the picture is deceptive. It shows hose clamps for the bellows but you send zip ties instead.
June 22, 2017
Best quality.....and most important customer service
I guess I would have to say 1A auto out preforms any other after market parts store that is on the internet.....if I ever had a problem with a part ....which I have...wasnt there fault. It was mine....they either reshipped me the right part or refunded my money no questions ask.....customer service is the best ...the women are probably the most knowledgeable bless there hearts....wont buy from anybody else....thank you
August 1, 2020
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet Buick Pontiac Olds Steering Kit 6 Piece Set TRQ PSA58511-1ASFK02865 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.