1ABPS03060-Chevrolet Buick Pontiac Olds Rear Semi-Metallic Brake Pads

Replaces

1999 Pontiac Montana Rear Semi-Metallic Brake Pads

1ABPS03060-1354762-1999
Guaranteed to fit: 1999 Pontiac Montana

Fit Details

  • Front or Rear Location: Rear

Part Details

  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • TRQ BFA73606
FREE SAME DAY SHIPPING
Part 1ABPS03060
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA73606

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      Brake Pad Contact Point Grease
      Brake Pad Hardware
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts
    • Jack up the car and remove the wheel
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper
    • Undo the two 15mm bolts on the back of the caliper
    • Pull caliper off, using a screw driver to pry it off if necessary
    • Secure caliper bracket safely to avoid stressing the brake line
  2. step : Removing the Caliper Bracket and Rotor (3:08)
    • Pry brake pads out of the caliper bracket
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage)
    • Remove bracket and rotor
  3. step : Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut
    • Replace the caliper bracket and tighten bolts to 90ft/lbs
    • Remove caliper bracket slides and clean with a wire brush
    • Slide brake pads into place
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper
    • Place the caliper back on to the bracket
    • Clean caliper bolts and add small amount of oil
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket


Fits the following Makes:

Year Make Model Description
1997-2005Buick Century Buick Century Rear Semi-Metallic Brake Pads
2008-2009Buick LaCrosse Buick LaCrosse V8 5.3L Rear Semi-Metallic Brake Pads
1997-2004Buick Regal Buick Regal Rear Semi-Metallic Brake Pads
2002-2007Buick Rendezvous Buick Rendezvous Rear Semi-Metallic Brake Pads
2000-2010Chevrolet Impala Chevrolet Impala Rear Semi-Metallic Brake Pads
2000-2007Chevrolet Monte Carlo Chevrolet Monte Carlo Rear Semi-Metallic Brake Pads
2002-2005Chevrolet Venture Chevrolet Venture All Wheel Drive Rear Semi-Metallic Brake Pads
1999-2004Oldsmobile Alero Olds Alero Rear Semi-Metallic Brake Pads
1998-2002Oldsmobile Intrigue Olds Intrigue Rear Semi-Metallic Brake Pads
2001-2004Oldsmobile Silhouette Olds Silhouette All Wheel Drive Rear Semi-Metallic Brake Pads
2001-2005Pontiac Aztek Pontiac Aztek Rear Semi-Metallic Brake Pads
1999-2005Pontiac Grand Am Pontiac Grand Am Rear Semi-Metallic Brake Pads
1997-2003Pontiac Grand Prix Pontiac Grand Prix Rear Semi-Metallic Brake Pads
1999-2004Pontiac Montana Pontiac Montana Rear Semi-Metallic Brake Pads
2005Pontiac Montana Pontiac Montana V6 3.4L Rear Semi-Metallic Brake Pads
1997-1998Pontiac Trans Sport Pontiac Trans Sport Rear Semi-Metallic Brake Pads

Part Interchange

Brand Label Part Number
Raybestos EHT698H
Raybestos Brakes EHT698H

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BFA73606
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Pontiac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Pontiac or General Motors Company. See all trademarks.

Chevrolet Buick Pontiac Olds Rear Semi-Metallic Brake Pads TRQ-1ABPS03060 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1999 Pontiac Montana with these options.