1ABMS00021-Chevrolet Buick Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings

Replaces

2006 Chevrolet Monte Carlo with ABS Brakes Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings

1ABMS00021-686883-2006
Guaranteed to fit: 2006 Chevrolet Monte Carlo

Fit Details

  • Vehicle Brake Option: with ABS Brakes
  • Front or Rear Location: Front

Part Details

  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Front Wheel Bearing & Hub Assemblies
  • Bearing Type: Ball Bearing
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware

This part replaces:

  • TRQ BKA52057
FREE SAME DAY SHIPPING
Save 23%
List: $226.95 Save: $52.00
Part 1ABMS00021
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA52057

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Friction Material:   Ceramic
  • Bearing Type:   Ball Bearing
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Replacement Brake Rotors
      (2) Front Wheel Bearing & Hub Assemblies
      Brake Pad Contact Point Grease
      Brake Pad Hardware

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • Fits FRONT Rotors
  • 4 Piece Brake Pad Set
  • No core charge
  • Includes shims
  • Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 15251335
  • Fit 5 Stud Wheels
  • No core charges

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Triangular Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 7467357, 7467587, 12413093, 12413094, 12413125, 12413126, 12413194, 88964168
  • Wheel studs already installed
  • Fit models with ABS (Anti-Lock Brakes) only
  • Include ABS sensors with correct plugs

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:39)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:15)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a pry bar to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:24)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (2:58)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
  6. step : Installing the New Brake Rotor (3:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the 15mm bolts to 75 foot-pounds of torque
  7. step : Installing the New Brake Pads (4:21)
    • Push the brake pad slides into place
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the 13mm bolts to 30 foot-pounds
  8. step : Reattaching the Wheel (5:43)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Fasten on the lug nut covers with a 19mm socket
  9. step : Testing the Brakes (6:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 15mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2008Buick Lucerne Buick Lucerne V6 3.8L Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings
2009-2011Buick Lucerne Buick Lucerne V6 3.9L Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings
2006-2008Chevrolet Impala Chevrolet Impala with ABS Brakes Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings
2009-2011Chevrolet Impala Chevrolet Impala Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings
2012-2013Chevrolet Impala Chevrolet Impala (without Police & Taxi Package) Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings
2006-2007Chevrolet Monte Carlo Chevrolet Monte Carlo with ABS Brakes Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings

Part Interchange

Brand Label Part Number
ACDelco FW293MX
ACDelco FW128
ACDelco FW116
ACDelco FW293
Aimco 55126
Bendix PRT5654
Chicago Rawhide BR930149
Chicago Rawhide BR930548K
DIY Solutions BFS01216
Delphi 7467564
Delphi 12413068
Drive Tech America NT513179
DuraGo BR55126
GMB 730-0055
General Motors 12429203
General Motors 12429205
General Motors 88964168
General Motors 12413035
General Motors 88964968
General Motors OEM 88964168
General Motors OEM 12413035
General Motors OEM 12429205
General Motors OEM 12429203
General Motors OEM 88964968
MOOG Hub Assemblies 513179
Mevotech H513179
Raybestos EHT1159H
Raybestos SGD1159C
Raybestos MGD1159CH
Raybestos 713199
Raybestos 713179
Raybestos Brakes 713199
Raybestos Brakes SGD1159C
Raybestos Brakes MGD1159CH
Raybestos Brakes EHT1159H
Raybestos Brakes 713179
Raybestos Brakes 580403
SKF BAR-5124
SKF BR854
SKF BR930149
SKF BR930548K
Timken 513179
Wagner BD126347

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA52057
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Brakes
price was very nice.. delivery was quicker then expected. Easy installation. So no problem with them. Will buy again.
April 26, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company. See all trademarks.

Chevrolet Buick Front Ceramic Brake Pad & Rotor Kit with Wheel Bearings TRQ-1ABMS00021 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2006 Chevrolet Monte Carlo with these options.