Replaces

2009 Cadillac Escalade EXT Front Caliper Hardware Kit

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

 

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2016Cadillac Escalade Cadillac Escalade Front Caliper Hardware Kit
2008-2016Cadillac Escalade ESV Cadillac Escalade ESV Front Caliper Hardware Kit
2008-2013Cadillac Escalade EXT Cadillac Escalade EXT Front Caliper Hardware Kit
2013-2016Cadillac XTS Cadillac XTS with 6 Lug Wheels with Heavy Duty Brakes Front Caliper Hardware Kit
2008-2013Chevy Avalanche Chevy Avalanche Front Caliper Hardware Kit
2009-2014Chevy Express 1500 Van Chevy Express 1500 Van Front Caliper Hardware Kit
2008-2016Chevy Silverado 1500 Chevy Silverado 1500 Front Caliper Hardware Kit
2015-2016Chevy Suburban Chevy Suburban Front Caliper Hardware Kit
2008-2014Chevy Suburban 1500 Chevy Suburban 1500 Front Caliper Hardware Kit
2008-2016Chevy Tahoe Chevy Tahoe Front Caliper Hardware Kit
2009-2014GMC Savana 1500 Van GMC Savana 1500 Van Front Caliper Hardware Kit
2008-2016GMC Sierra 1500 GMC Sierra 1500 Front Caliper Hardware Kit
2008-2016GMC Yukon GMC Yukon Front Caliper Hardware Kit
2015-2016GMC Yukon XL GMC Yukon XL Front Caliper Hardware Kit
2009-2014GMC Yukon XL 1500 GMC Yukon XL 1500 Front Caliper Hardware Kit
Part 1ABRX00114
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Cadillac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Cadillac or General Motors Company. See all trademarks.