Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:52)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:07)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 19 mm caliper bracket bolts.
    • Remove the rotor and pop the plug out of the rotor.
  3. step : Install the new disc brakes (2:07)
    • Hit the emergency brake with brake cleaner.
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle and replace the little access plug.
    • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 25 ft lbs.
  4. step : Mount the wheel (4:39)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 21mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2012 Infiniti EX35 Rear Caliper Hardware Kit
  • 2013 Infiniti EX37 Rear Caliper Hardware Kit
  • 2003-2012 Infiniti FX35 Rear Caliper Hardware Kit
  • 2003-2008 Infiniti FX45 Rear Caliper Hardware Kit
  • 2011-2012 Infiniti G25 Rear Caliper Hardware Kit
  • 2003-2008 Infiniti G35 without Brembo Calipers Rear Caliper Hardware Kit
  • 2008-2013 Infiniti G37 without Brembo Calipers Rear Caliper Hardware Kit
  • 2013 Infiniti JX35 Rear Caliper Hardware Kit
  • 2006-2010 Infiniti M35 Rear Caliper Hardware Kit
  • 2012-2013 Infiniti M35h Rear Caliper Hardware Kit
  • 2011-2013 Infiniti M37 Caliper Hardware Kit Rear without Sport Package
  • 2006-2010 Infiniti M45 Rear Caliper Hardware Kit
  • 2011-2013 Infiniti M56 X Rear Caliper Hardware Kit
  • 2011-2013 Infiniti M56 without Sport Package Base Model Rear Caliper Hardware Kit
  • 2003-2009 Nissan 350Z without Brembo Calipers Rear Caliper Hardware Kit
  • 2009-2012 Nissan 370Z Rear Caliper Hardware Kit for Models with Cast Iron Calipers
  • 2011-2013 Nissan Leaf Rear Caliper Hardware Kit
  • 2009-2013 Nissan Maxima Rear Caliper Hardware Kit
  • 2003-2007 Nissan Murano Rear Caliper Hardware Kit
  • 2009-2012 Nissan Murano Rear Caliper Hardware Kit
  • 2013 Nissan Pathfinder Rear Caliper Hardware Kit
  • 2004-2009 Nissan Quest Rear Caliper Hardware Kit
  • 2011-2013 Nissan Quest Rear Caliper Hardware Kit
  • 2008-2013 Nissan Rogue Rear Caliper Hardware Kit
  • 2009-2013 Suzuki Grand Vitara Rear Caliper Hardware Kit
Only 2 left in stock
Part #: 1ABRX00072


Order must be placed by 4pm ET

How-to Video:

(05:32 min)