Specifications:

  • Includes both LH (Driver Side) & RH (Passenger Side) Rear
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:41)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:08)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads and Rotor (1:33)
    • Remove the two 10mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the rotor off
    • Pry the brake pads off the caliper with a flat blade screwdriver
    • Clean the friction areas with a wire brush
    • Clean the slides with a wire brush
    • Pry off the brake pad slides with a flat blade screwdriver
    • Tap the slides on with a hammer
    • Apply white grease to the slides
  4. step : Installing the Brake Pads and Rotors (5:02)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Adjust the emergency brake, if necessary, by turning the star wheel with a flat blade screwdriver
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the two 10mm bolts by hand
    • Tighten the 10mm bolts to 17 foot-pounds
  5. step : Reattaching the Wheel (7:11)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  6. step : Testing the Brakes (7:35)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp
  • Chisel
  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004Ford F150 Truck Ford F150 Truck New Body Style Rear Caliper Hardware Kit
2005-2011Ford F150 Truck Ford F150 Truck Rear Caliper Hardware Kit
2006-2008Lincoln Mark LT Lincoln Mark LT Rear Caliper Hardware Kit
Part #: 1ABRX00052

Out of Stock

How-to Video:

(08:07 min)