Replaces

Cadillac Windshield Wiper Pulse Board General Motors OEM 88958172 - GMWWM00001

Specifications:

  • OEM Windshield Wiper Motor Pulse Board
  • Includes cover
  • Controls delay system

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wiper Arm (0:30)
    • Pry off the wiper arm cap by hand
    • Remove the 15mm nut from the wiper arm stud
    • Pull the wiper arm off the stud
  2. step : Removing the Cowl Panel (1:39)
    • Peel off the weatherstrip
    • Remove the four 7mm screws from the cowl panel
    • Lift up and carefully release the passenger side of the cowl panel
    • Remove the 10mm nut from the driver side cowl panel
    • Remove the driver side cowl panel up and out
  3. step : Removing the Wiper Transmission (2:38)
    • Remove the two 10mm bolts from the wiper transmission assembly
    • Lift the assembly up toward the center of the vehicle
    • Disconnect the transmission wiring harness
  4. step : Removing the Windshield Wiper Pulse (3:14)
    • Remove the T20 Torx screws from the wiper motor cover
    • Remove the cover from the back of the wiper motor
  5. step : Installing the Windshield Wiper Pulse (4:15)
    • Insert the cover to the back of the wiper motor
    • Hand-tighten the four T20 Torx screws in a cross pattern
    • Tighten the Torx screws in a cross pattern
    • Torque the Torx screws to 6 inch-pounds in a cross pattern
    • Torque the Torx screws to 12 inch-pounds in a cross pattern
    • Torque the Torx screws to 18 inch-pounds in a cross pattern
  6. step : Reinstalling the Wiper Transmission (6:03)
    • Connect the wiper transmission electrical connector
    • Insert the wiper transmission into place
    • Tighten the two 10mm bolts to the wiper transmission
  7. step : Reinstalling the Cowl Panel (6:38)
    • Insert the driver side cowl panel into place
    • Tighten the 10mm nut to the driver side
    • Insert the passenger side cowl panel into place
    • Tighten the 7mm screws to the panel
    • Press on the weatherstrip
  8. step : Installing the Wiper Arm (7:52)
    • Put the wiper arm onto the stud
    • Fasten the 15mm nut onto the wiper arm stud
    • Push on the wiper arm cap

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket
  • 15mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
The pulse board did the trick. Great price and and a video showing me how to install. Very satisfied. Will do business again
June 28, 2017
Purchased
10 months ago
Easy fix, even for novices like me.
Videos definitely help.
November 4, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 4 answers
Will this being replaced help wipers that turn on intermittently or don't stop moving?
Hector on Jan 19, 2016
BEST ANSWER: This can fix a lot of wiper problems including these. Also it sounds like you could have a wiring issue, if this were to not fix your order. Have a great day!

How-to Video:

(09:18 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket
  • 15mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver



This part replaces:

  • General Motors OEM 88958172
  • OE # 88958172

Vehicle Fit

  • 2003-2007 Cadillac CTS Windshield Wiper Pulse Board with Cover General Motors OEM 88958172
  • 2004-2007 Cadillac CTS-V Windshield Wiper Pulse Board with Cover General Motors OEM 88958172
  • 2004-2006 Cadillac SRX Windshield Wiper Pulse Board with Cover General Motors OEM 88958172
  • 2005-2011 Cadillac STS Windshield Wiper Pulse Board with Cover General Motors OEM 88958172
  • 2006-2011 Cadillac STS-V Windshield Wiper Pulse Board with Cover General Motors OEM 88958172
Only 1 left in stock
Part #: GMWWM00001

Ships Same Day for orders placed by 4 P.M. ET

Brand #: 88958172

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More