Replaces

Cadillac CTS SRX STS Heater Blower Motor with Fan Cage - 1AHCX00233

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This Cadillac SRX, STS, STS-V, CTS, & CTS-V heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part number: 25740408
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:33)
    • Remove the two Phillips head screws from the dash panel
    • Remove the two 7mm bolts from the dash panel
    • Release the dash panel tabs
    • Pull down the dash panel
    • Disconnect the blower motor wiring harness
    • Remove two of the three 8mm bolts from the blower motor
    • Open the glove box
    • Remove the Phillips head screws from the glove box liner
    • Disconnect the tire pressure monitor switch harness
    • Pull out the glove box liner
    • Remove the last 8mm bolt from the blower motor
    • Pull the blower motor down and out
  2. step : Installing the Blower Motor (3:11)
    • Put the blower motor into place
    • Insert the three 8mm bolts into the blower motor
    • Connect the blower motor wiring harness
    • Connect the tire pressure button wiring harness
    • Push the glove box liner into place
    • Insert the Phillips head screws into the glove box liner
    • Put the dash panel into place
    • Insert the two Phillips head screws into the dash panel
    • Insert the two 7mm bolts into the dash panel
    • Test the blower motor on all fan speeds

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 8mm Socket

3.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
Right motor & Cage but incorrect electrical
I watched the video. Its tricky to remove and replace but I finally got it. The real challenge came when I tried to plug in the power. The old motor had to terminals facing outwards but the new had parallel terminals like a wall outlet.I was to far into the project to give up so I broke apart the old terminal and made a tape like new one. Otherwise the price & delivery were excellent
January 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand of motor is used in this 1A Auto Blower motor?
M S January 14, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K January 15, 2017
Year Make Model Description
2003-2007Cadillac CTS Cadillac CTS Heater Blower Motor with Fan Cage
2004-2006Cadillac SRX Cadillac SRX Heater Blower Motor with Fan Cage
2005-2006Cadillac STS Cadillac STS Heater Blower Motor with Fan Cage
Part #: 1AHCX00233


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:37 min)