Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

  • LH (Driver side)
  • Replaces dealer part number: 15930597
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement

Note: For 2004 Models requiring a production date: You can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight Assembly (0:29)
    • Remove the spare tire cover.
    • Remove the five plastic clips.
    • Remove the panel.
    • Pull the insulation back.
    • Pull the harness from the car.
    • Disconnect the harness.
    • Remove the two 10mm nuts securing the light.
    • Push the harness through and pull the taillight out.
  2. step : Replacing a Bulb (3:03)
    • Push the tab down and twist the socket counterclockwise.
    • Pull the bulb out.
    • Push the new bulb in.
    • Twist the socket clockwise to secure it.
  3. step : Replacing the Taillight Assembly (3:39)
    • Feed the harness into the car.
    • Line up the taillight and push it into place.
    • Reconnect the harness and clip it to the car.
    • Put the insulation back into place.
    • Replace the panel.
    • Replace the five plastic clips.
    • Replace the spare tire cover.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004Cadillac CTS Cadillac CTS (Built After 1/04/04 Production Date) Tail Light Driver Side
2005-2007Cadillac CTS Cadillac CTS Tail Light Driver Side
Part #: 1ALTL01073


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:51 min)