Replaces

Cadillac CTS STS Brake Kit Rear Nakamoto MD922, 55098 - 1ABFS01027

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      (1) Rear Semi-Metallic Brake Pad Set
      (2) Rear Replacement Brake Rotors
  • Front or Rear Location:   Rear
  • Rear Brake Rotor Specifications:
      11.73" (298mm)
      5 Lug
      Vented
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

This rear brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Semi-Metallic Disc Brake Pads
  • 4 Piece REAR brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 15240719, 25693146
  • Fits 5 Stud Wheels
  • Vented
  • 11.74" (298mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:59)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (2:18)
    • Remove the T30 Torx bolt from the rotors
    • Remove the two 13mm bolts holding the caliper bracket
    • Remove the brake caliper
    • Secure the caliper with a bungee chord
    • Loosen the two 18mm bolts from the caliper carrier bracket
    • Remove both 18mm bolts from the carrier bracket
    • Remove the carrier
    • Remove the rotor
  3. step : Preparing the Brake Pads and Rotor (5:17)
    • Slide out the brake pad slides
    • Apply a thin coat of grease to the slide
    • Insert the brake pad slide into place
    • Remove the metal brake pad slides
    • Clean the metal slide with a wire brush
    • Clean the caliper carrier seats for the slides with a wire brush
    • Insert the slide into place
    • Clean the hub with a wire brush
    • Apply a thin coat of brake grease to the hub
  4. step : Installing the Brake Pads and Rotor (13:25)
    • Insert the rotor into place
    • Add brake parts cleaner to the rotor
    • Thread the T30 Torx bolt into place
    • Lower the brake caliper bracket to the rotor
    • Tighten the two 18mm bolts to the caliper bracket
    • Torque the 18mm bolts to 88 foot-pounds
    • Apply brake grease to the contact points of the pads where they touch the metal slides
    • Apply brake grease to the back of the brake pads
    • Lower the caliper from the bungee chord
    • Compress the pistons with vise-grips or a C-clamp
    • Insert the caliper into place
    • Start the two 13mm bolts to the brake caliper
    • Torque the bolts to 44 foot-pounds
  5. step : Reattaching the Wheel (20:01)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 13mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2005Cadillac CTS Cadillac CTS Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2006-2007Cadillac CTS Cadillac CTS Rear Premium Posi Semi-Metallic Brake Kit for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
2005-2011Cadillac STS Cadillac STS Rear Premium Posi Semi-Metallic Brake Kit for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto
Part #: 1ABFS01027


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD922, 55098

How-to Video:

(21:50 min)