Replaces

Cadillac CTS STS Brake Kit Front Nakamoto CD921, 18060686 - 1ABFS01067

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    Vented
    5 Lug
    11.93" (303mm)
  • Brake Pad Friction Material: Ceramic
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (2) Front Replacement Brake Rotors
  • Front or Rear Location: Front
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 88964102
  • Fits 5 Stud Wheels
  • Vented
  • 11.92" (303mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (2:30)
    • Remove the T30 Torx bolt from the rotors
    • Remove the two 18mm bolts holding the caliper bracket
    • Remove the brake caliper
    • Secure the caliper with a bungee chord
    • Loosen the two 18mm bolts from the caliper carrier bracket
    • Remove both 18mm bolts from the carrier bracket
    • Remove the carrier
    • Remove the rotor
  3. step : Preparing the Brake Pads and Rotor (5:19)
    • Clean the hub with a wire brush
    • Apply a thin coat of brake grease to the hub
    • Remove the old pads
    • Remove the metal slides
    • Clean the metal slide with a wire brush
    • Clean the caliper carrier seats for the slides with a wire brush
    • Insert the slide into place
    • Remove the brake pad slides
    • Clean off the brake grease
    • Apply a thin coat of brake grease to the slides
    • Insert the slides into their boots
  4. step : Installing the Brake Pads and Rotor (7:43)
    • Insert the rotor into place
    • Add brake parts cleaner to the rotor
    • Thread the T30 Torx bolt into place
    • Lower the brake caliper bracket to the rotor
    • Tighten the two 18mm bolts to the caliper bracket
    • Torque the 18mm bolts to 96 foot-pounds
    • Apply brake grease to the contact points of the pads where they touch the metal slides
    • Apply brake grease to the back of the brake pads
    • Lower the caliper from the bungee chord
    • Compress the pistons with vise-grips or a C-clamp
    • Insert the caliper into place
    • Start the two 18mm bolts to the brake caliper
    • Torque the bolts to 46 foot-pounds
  5. step : Reattaching the Wheel (10:55)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Great parts and excellent customer service
The parts are great and the service is unmatched quick delivery and they got videos to go along with everything you're working on . I will definitely be buying more parts from this website thank you
February 8, 2018
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2005Cadillac CTS Cadillac CTS Front Premium Posi Ceramic Brake Kit for Models with RPO Code FE3 (Sport Suspension) Nakamoto
2005-2008Cadillac STS Cadillac STS Front Premium Posi Ceramic Brake Kit for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto

This part replaces:

  • Nakamoto CD921, 18060686
Part #: 1ABFS01067


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD921, 18060686

How-to Video:

(12:48 min)