Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Halogen

Specifications

  • Fits LH (Driver Side)
  • Includes lens and housing
  • Bulbs not included
  • Correct for Halogen Style Headlights
    • not correct for HID (High Intensity Discharge) or Xenon Style Headlights
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Bumper (0:33)
    • Untwist the pins along the radiator shield and pull them out
    • Remove the shields by pulling up
    • Pull the weatherstripping up
    • Pry the push clips out from atop the bumper with a trim tool
    • Remove the 10mm bolt from the bracket
    • From behind the bumper, pry out the trim clips from the rubber shield on side of the grille
    • Pry out the push clips from beneath the bumper with a trim tool
    • Disconnect the fog light wiring harness
    • Pull the air duct on each side down and out
    • Loosen the hose clamp on the headlight washer hose with needle nose pliers
    • Pry off the hose with a right angle pick
    • Insert a bolt to the end of the hose to block fluid
    • Pry out the push clips in the wheel well
    • Pry back the wheel well liner
    • Remove the 10mm bolt on each side from behind the wheel well liner
    • Pull the bumper back and off the vehicle
  2. step : Removing the Headlight Housing (7:55)
    • Remove the two 10mm nuts from the headlight
    • Pull the headlight straight-forward
    • Disconnect the electrical connector
  3. step : Installing the Headlight Housing (9:22)
    • Connect the electrical connector
    • Press the headlight into place
    • Tighten the 10mm nuts to the headlight
  4. step : Installing the Bumper (10:46)
    • Press the bumper into place
    • Tighten the 10mm bolts to the bracket behind the grille
    • Tighten the 10mm bolts to the grille behind the wheel well
    • Insert the wheel well into place
    • Press the push clips to the wheel well
    • Connect the fog light connector
    • Remove the bolt from the headlight washer hose
    • Connect the hose to the washer pump
    • Tighten the hose clamp with needle nose pliers
    • Reinstall the shield to the side of the grille
    • Press on the push clips beneath the bumper
    • Attach the air duct to each side
    • Press the push clips atop the bumper into place
    • Press on the weatherstripping
    • Clip in the protective shields
    • Press on the push clips to the top of the shields

Tools needed for replacement:

    General Tools

  • Pick

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2013Cadillac CTS Cadillac CTS Halogen Headlight Driver Side
2014Cadillac CTS Cadillac CTS Wagon Halogen Headlight Driver Side
2014Cadillac CTS Cadillac CTS Coupe Halogen Headlight Driver Side
Part #: 1ALHL01884


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(16:39 min)