Replaces

Cadillac CTS Chevy Camaro Wheel Bearing & Hub Assembly TRQ BHA54091 - 1ASHF00404

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54091 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:37)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:26)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Remove the T30 Torx bolt from the brake rotor
    • Strike the rotor with a hammer if necessary
    • Pull off the rotor
  3. step : Removing the Hub (3:05)
    • Spray rust penetrant on the bolts that hold the hub to the wheel knuckle
    • Loosen the three 16mm bolts from the hub
    • Place an impact socket on one of the bolts
    • Tap the socket with a hammer to separate the hub from the knuckle
    • Remove the three 16mm bolts from the hub
    • Tap the hub off the spindle with a hammer
  4. step : Installing the Hub (5:03)
    • Clean the wheel knuckle with sandpaper
    • Put the hub onto the wheel knuckle
    • Start the three 16mm bolts into the hub
    • Tighten the three bolts evenly
    • Tighten the three bolts to 79 foot-pounds of torque
  5. step : Installing the Brakes (6:34)
    • Line up the rotor with the bolt hole on the hub
    • Slide on the rotor
    • Insert the T30 Torx screw into the rotor
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Tighten the T30 screw to 89 inch-pounds
    • Release the brake caliper from the bungee cord
    • Put the caliper and bracket into place
  6. step : Reattaching the Wheel (8:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Sandpaper
  • Bungee Cord

  • Ratchets & Related

  • 1/2 Inch Ratchet
  • Torque Wrench
  • Socket Extensions
  • 3/8 Inch Drive Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 16mm Wrench

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
1
0
May be a defective replacement part
I really had great delivery...less than 24 hrs! Wow!
However with less than 200 miles i have to take assembly apart as noisey wheel has progressively.gotten louder...will follow up upon disassembly
May 30, 2018
Purchased
4 months ago
Response from 1A Auto
Hello. Thank you for taking the time to review the wheel bearing you purchased from us. If you believe the part is defective please do not hesitate to contact our customer service department at 888-844-3393. One of our representatives can look into the issue for your and help reach a suitable resolution! Thank you, 1A Auto
May 31, 2018
Tim K
A 1 satisfaction
The hub fit perfect. And the tutorial on how to remove and install really help. I'm a customer for life now.
March 12, 2018
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Does this have the built in ABS tone ring sensor?
Daniel R on Jun 25, 2017
BEST ANSWER: the sensor is on the other part and it reads the bearings on the hub as it turns

Vehicle Fit

Year Make Model Description
2008Cadillac CTS Cadillac CTS Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
2008Cadillac CTS Cadillac CTS Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
2009-2011Cadillac CTS Cadillac CTS (excluding V Models) Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
2009Cadillac CTS Cadillac CTS (excluding V Models) Wheel Bearing & Hub Assembly Driver or Passenger Side Front TRQ
2010-2013Cadillac CTS Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
2012-2016Cadillac CTS Cadillac CTS Rear Wheel Drive (excluding V Models) Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
2012-2016Cadillac CTS Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
2010-2011Chevy Camaro Chevy Camaro Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
2010-2016Chevy Camaro Chevy Camaro LT Wheel Bearing & Hub Assembly Rear Automatic Transmission Driver or Passenger Side TRQ
2010-2015Chevy Camaro Chevy Camaro Wheel Bearing & Hub Assembly Rear Driver or Passenger Side Automatic Transmission LS TRQ
2012-2015Chevy Camaro Chevy Camaro Wheel Bearing & Hub Assembly Front Driver or Passenger Side V8 6.2L TRQ
2012-2015Chevy Camaro Chevy Camaro Wheel Bearing & Hub Assembly Front Driver or Passenger Side V6 3.6L TRQ

This part replaces:

  • Hollander 538-00165
  • TRQ BHA54091
  • OE # 13504970
Part #: 1ASHF00404


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA54091

How-to Video:

(09:08 min)