Replaces

Cadillac CTS Chevy Camaro Wheel Bearing & Hub Assembly Pair TRQ BHA53674 - 1ASHS00681

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part number: 13504970
  • New wheel studs installed
  • Direct replacements
  • Built to strict quality control standards
  • Do NOT fit Supercharged (ZL1 or CTS-V) Models

These wheel bearing & hub assemblies are great replacements and have good cost savings over units from the dealer.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA54091 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:37)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:26)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Remove the T30 Torx bolt from the brake rotor
    • Strike the rotor with a hammer if necessary
    • Pull off the rotor
  3. step : Removing the Hub (3:05)
    • Spray rust penetrant on the bolts that hold the hub to the wheel knuckle
    • Loosen the three 16mm bolts from the hub
    • Place an impact socket on one of the bolts
    • Tap the socket with a hammer to separate the hub from the knuckle
    • Remove the three 16mm bolts from the hub
    • Tap the hub off the spindle with a hammer
  4. step : Installing the Hub (5:03)
    • Clean the wheel knuckle with sandpaper
    • Put the hub onto the wheel knuckle
    • Start the three 16mm bolts into the hub
    • Tighten the three bolts evenly
    • Tighten the three bolts to 79 foot-pounds of torque
  5. step : Installing the Brakes (6:34)
    • Line up the rotor with the bolt hole on the hub
    • Slide on the rotor
    • Insert the T30 Torx screw into the rotor
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Tighten the T30 screw to 89 inch-pounds
    • Release the brake caliper from the bungee cord
    • Put the caliper and bracket into place
  6. step : Reattaching the Wheel (8:06)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Sandpaper
  • Bungee Cord

  • Ratchets & Related

  • 1/2 Inch Ratchet
  • Torque Wrench
  • Socket Extensions
  • 3/8 Inch Drive Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 16mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Fast delivery/Great Product
Product was exactly how described. Very fast delivery. Great price. Will buy other products as needed again in the future.
December 4, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
Does this fit the SS? The details say not ZL1/CTS-V but don't mention SS.
erik a on Jan 31, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle as long as you do not have a supercharged model. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
do these include the wheel sensors?
Neal G on Jan 4, 2018
BEST ANSWER: No, these are just the hub assemblies to hold the wheels on.

How-to Video:

(09:08 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Sandpaper
  • Bungee Cord

  • Ratchets & Related

  • 1/2 Inch Ratchet
  • Torque Wrench
  • Socket Extensions
  • 3/8 Inch Drive Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 16mm Wrench



This part replaces:

  • TRQ BHA53674

Vehicle Fit

  • 2008 Cadillac CTS Wheel Bearing & Hub Assembly Pair Front TRQ
  • 2008 Cadillac CTS Wheel Bearing & Hub Assembly Pair Rear TRQ
  • 2009-2011 Cadillac CTS excluding V Models Wheel Bearing & Hub Assembly Pair Rear TRQ
  • 2009 Cadillac CTS excluding V Models Wheel Bearing & Hub Assembly Pair Front TRQ
  • 2010-2013 Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ
  • 2010-2016 Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Pair Rear TRQ
  • 2012-2016 Cadillac CTS Rear Wheel Drive excluding V Models Wheel Bearing & Hub Assembly Pair Rear TRQ
  • 2010-2011 Chevy Camaro Wheel Bearing & Hub Assembly Pair Front TRQ
  • 2010-2016 Chevy Camaro Wheel Bearing & Hub Assembly Pair Automatic Transmission V6 3.6L Rear TRQ
  • 2012-2015 Chevy Camaro Wheel Bearing & Hub Assembly Pair V8 6.2L Front TRQ
  • 2012-2015 Chevy Camaro Wheel Bearing & Hub Assembly Pair LS Automatic Transmission Front TRQ
  • 2012-2015 Chevy Camaro Wheel Bearing & Hub Assembly Pair V6 3.6L Front TRQ
Part #: 1ASHS00681

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA53674

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More