Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacements parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we're going to show you how to replace the mirror on this 2003 Buick LaSabre. Tools you'll need are Phillips screwdriver, a flat blade screwdriver and a door panel clip tool or putty knife, as well as a 10mm wrench or a socket and ratchet.
You start with a flat blade screwdriver and this panel actually kind of pulls. Carefully pry a little bit, up and out and then there's a little wire for your speaker. Pry on the side where you can see the tab. Pull the speaker lead out. Here, pry the front very lightly. Pull that out like that. Then again, the little tab right here, pry that out. Pull that out. Try not to drop that. Then back here on your reflector just kind of go in there and pry it out.
Now inside the door there's 2 screws. One there and one right there. And I'll just fast forward through removing those screws. They are Phillips screws. Then you use a putty knife or door panel clip tool, whatever you might have, and use your foot to hold it. Keep the door open. I'll give a yank there. It comes off. Here there's a master switch you kind of pull out on a couple of tabs. You pull out on these tabs and then that rotates down. The switch comes out and there's your door panel out.
Your mirror, a little piece of insulation, just kind of pull that up and out. Okay, this little clip, you just kind of bend it to the side. Pull that out. Let's clip it onto our module here and then there's a little pushbutton there. Push it in. Disconnect. 10mm socket and ratchet. You could use the wrench as well. I'll just fast forward as I remove the two bottom bolts.
Mirror is just kind of stuck a little bit to the gasket. Pull the mirror out. Here's the original mirror. New mirror from 1A Auto. Now our original mirror's in fine shape so I'm just going to reinstall this in the vehicle. But you can see the new mirror from 1A Auto is all the same. Just a couple of shipping safety things. It has the gasket and everything. Most importantly the connector is exactly the same. This is going to connect and bolt in. And connect just like the original. The only thing you might want to do is this little clip here is just kind of taped on to the harness so you could transfer that over to your new mirror so everything stays in place properly.
New mirror from 1A Auto is going to go on there and bolt on and be a great replacement. It comes molded in black plastic. You can obviously put that on there and it fixes your problem. If you want to match the vehicle I suggest going to an automotive parts store that has a good automotive paint shop and they can usually match the color of paint for your vehicle. Mix some up, put it in an air-charged spray can and you can spray it yourself and make it match. It wouldn't be perfect but it would be pretty good.
Like I said, this one's fine so I'm just going to reinstall my original. Put your harness through carefully. Then just look and make sure your studs go through correctly. Start one of the nuts. Carefully start my other two. Okay, fast forward through tightening up those nuts. You want to make sure they're snug, not overly tight. Then I did forget to film putting the gasket back in. I do that later when I'm putting the door panel back together. And take your wire, clip it in. Again, if you're putting a new mirror on you would want to probably change this clip over. It's just taped on here. Then go ahead and plug it in.
Just an explanation of what I'm going to do here. The door panel has a metal lip in it, I guess, kind of like a tongue and groove. It has the tongue side and then on the door itself on the rubber weather strip is the groove. You just need to make sure that you get that metal tongue into the groove and the best thing to do is kind of start it right where the hole for the door pull is. Start it there and then it kind of goes down in a lot easier.
You can see that I kind of look into that hole there and I kind of push the tongue into the groove a little bit. Make sure it's kind of lined up and it kind of pushes right down on. Now there are line-up tabs or line-up pins. Just make sure those are lined up. Make sure all your pins are lined up with the holes they're going into. Then once you're confident that they're lined up you can just kind of press the door panel on. Give it good hit in the corner at the bottom in the front and the rear. Make sure that the leads are out, the door lock leads and the speaker lead. Now you can start the two screws. I'll fast forward through that first one.
Best to start with your fingers first like this. Push it down in there. You might want to just take a screwdriver and push that pin down into the hole. Push it right in. Reflector snaps in. Our power lock connects. Pull the door handle out. Push that through. Push it back in. Push that in place and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're the company who's here for you on the internet and in person.
