100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Rear Brake Rotor Specifications: 11.42" (290mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:58)
    • Use your lug wrench or 19 mm socket and breaker bar to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Dismantle the brakes and discard the old pads and rotors. (1:12)
    • Observe your rotors and brake pads; look for signs of excess wear, uneven wear, or gouging in the pads and rotors.
    • Use your 10 mm socket and breaker bar to remove the caliper bolts.
    • Use a flat blade screwdriver and a prying motion to compress the caliper pistons enough to get the caliper off the rotor.
    • Discard the old brake pads and compress the caliper with a large c-clamp.
    • Remove the rotor.
  3. step : Install the new pads and rotor and reassemble the brakes. (3:34)
    • Hit the new rotor with brake parts cleaner or mineral spirits to remove any grease that may cause parts of the brakes to run hot and cause uneven wear.
    • Mount the new brake pads followed by the calipers.
    • Torque the 10 mm caliper bolts to 17-19 ft lbs.
  4. step : Replace the wheel (5:54)
    • Mount the wheel and preliminarily tighten the lug nuts (but do not torque them just yet)
    • Lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2000 Chrysler Town & Country Front & Rear Brake Rotor
  • 2000 Dodge Caravan with 15 Inch or 16 Inch Wheels Front & Rear Brake Rotor
  • 1997-2000 Dodge Grand Caravan with 15 Inch or 16 Inch Wheels Front & Rear Brake Rotor
  • 1997-2000 Plymouth Grand Voyager with 15 Inch or 16 Inch Wheels Front & Rear Brake Rotor
  • 1997-2000 Plymouth Voyager with 15 Inch or 16 Inch Wheels Front & Rear Brake Rotor

This part replaces:

  • Reference Number 5346
  • Reference Number 5383
  • Hollander 533-02334, -2403, 2433
  • Hollander 530-01882
  • OE # 4721023AG
  • OE # 4509340, 4721820AE
Part #: 1ABFS03225

How-to Video:

(07:07 min)