100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Rear Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug
  • Rear Brake Rotor Specifications: 12.60" (320mm)
  • Front Brake Rotor Specifications: 12.60" (320mm)
  • Rear Brake Rotor Specifications: 6 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:10)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:27)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:17)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nuts and strike the rotor from behind with a hammer
  5. step : Preparing the New Brake Pads and Rotors (3:04)
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  6. step : Installing the New Brake Rotor (4:12)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:16)
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the placeholder lug nut
  8. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (6:37)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Wire Brush
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004Infiniti QX56 Infiniti QX56 Front & Rear Brake Rotor
2005Infiniti QX56 Infiniti QX56 Front & Rear Brake Rotor (Built Before 3/05 Production Date)
2005Nissan Armada Nissan Armada Front & Rear Brake Rotor (Built Before 3/05 Production Date)
2004Nissan Pathfinder Armada Nissan Pathfinder Armada Front & Rear Brake Rotor
2004Nissan Titan Nissan Titan Front & Rear Brake Rotor
2005Nissan Titan Nissan Titan Front & Rear Brake Rotor (Built Before 3/05 Production Date)

This part replaces:

  • Reference Number 31328
  • Reference Number 31329
  • Hollander 530-59043
  • Hollander 533-59044
Part #: 1ABFS03218


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:06 min)