Replaces

Brake Rotor Rear Pair Nakamoto 55147 - 1ABFS00696

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear
  • Rear Brake Rotor Specifications:
      Vented
      11.93" (303mm)
      5 Lug

These rear brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 15223784, 5561178J00, 55611 78J00, 5561178J01, 55611 78J01, 20892952, 25804046, 15223784, 20892952
  • Fits 5 Stud Wheels
  • Vented
  • 11.93" (303mm) diameter

These rear brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
    • If the wheel will not come off, thread the lug nuts on and strike the tire with a hammer
  2. step : Inspecting the Brakes (1:59)
    • Check the thickness of the brake pads
    • Check for gauges on both sides of the rotor
  3. step : Removing the Brake Pads (2:15)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (4:52)
    • Remove two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  5. step : Installing the New Brake Rotor (7:51)
    • Slide the rotor on
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place, start the 15mm bolts by hand
    • Tighten the 15mm bolts to between 75 and 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (9:31)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket with the wear indicator on the lower side
    • Put the caliper on
    • Thread the 14mm bolts by hand
    • Tighten the 14mm bolts to between 20-22 foot-pounds
    • If you replaced the rotor, reinstall the T30 Torx bolt
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (12:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (13:12)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Jack Stands
  • Sledge Hammer
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Mineral Spirits
  • Brake Parts Cleaner
  • Cloth Rags
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 15mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 14mm Wrench
  • 15mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2012-2015Chevy Captiva Sport Chevy Captiva Sport Rear Brake Rotor Pair Nakamoto
2007-2009Chevy Equinox Chevy Equinox Rear Brake Rotor Pair Nakamoto
2007-2009Pontiac Torrent Pontiac Torrent Rear Brake Rotor Pair Nakamoto
2008-2010Saturn Vue Saturn Vue Rear Brake Rotor Pair Nakamoto
2007-2009Suzuki XL-7 Suzuki XL-7 Rear Brake Rotor Pair Nakamoto
Part #: 1ABFS00696


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 55147

How-to Video:

(13:39 min)