Replaces

Brake Rotor Rear Pair Nakamoto 55094-DSZ - 1APBR00037

These rear performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part number: 22705356
  • Fits 5 Stud Wheels
  • 10.63" Diameter Rotor

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 15 mm caliper bracket bolts.
    • Remove the rotor
  3. step : Install the new disc brakes (4:33)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Mount the caliper bracket and torque the 15 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 35 ft lbs.
  4. step : Mount the wheel (8:17)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
THE VERY BEST
THE rotors are more than I thought and the pads no more brake dust I got the rotors and pads as a set you will love the way they stop your car and if you have any kind of problem they take care of it right now now a few weeks later so what are you waiting for get the best brake and pads for the very best price Roger DELfosse
June 8, 2018
Purchased
4 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Chevy Cobalt Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2008 Chevy Cobalt Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding SS Models Performance Nakamoto
  • 2008-2010 Chevy HHR Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2005 Chevy Malibu New Body Style Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for (4th Vin Digit Z) Performance Nakamoto
  • 2006-2012 Chevy Malibu Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2007 Chevy Malibu Maxx Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007-2009 Pontiac G5 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2010 Pontiac G6 Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2006 Pontiac Pursuit Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007-2009 Saturn Aura Rear Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2007 Saturn Ion Red Line Cross Drilled & Slotted Brake Rotor Rear Zinc Coated Pair Performance Nakamoto

This part replaces:

  • Nakamoto 55094-DSZ
Part #: 1APBR00037

Nakamoto
Brand #: 55094-DSZ

How-to Video:

(09:17 min)