Replaces

Brake Rotor Rear Pair Nakamoto 3W7Z 2C026 AA - 1ABFS00240

Part Details

  • Quantity: Pair
  • Front or Rear Location: Rear

These brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 3W7Z 2C026 AA, 3W7Z2C026AA, 3W73 2C026 AA, 3W732C026AA
  • Fits 5 Stud Wheels

These brake rotors make great replacements and have excellent value over the dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:06)
    • Loosen the lug nuts with your lug wrench or 13/16 inch socket and ratchet
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel
  2. step : Remove the brakes (2:00)
    • Unbolt the two 10 mm caliper bolts
    • Use a flat blade screwdriver to compress the caliper pistons to get the caliper off the rotor
    • Pry out the brake pads with your flat blade screwdriver.
    • Remove the rubber plug behind the hub to loosen the emergency break with a screwdriver.
    • There is a star shaped gear that you turn with the flat blade screwdriver to loosen it.
    • Use a pry bar to apply outward pressure to the rotor and a hammer to break the rotor loose.
    • Clean up the emergency break adjustor with a bit of penetrating oil.
  3. step : Install the new brakes (6:50)
    • Put the rotor back on, cleaning the rotor with brake cleaner before hand.
    • Tighten the emergency break with a flat blade screwdriver
    • Install new brake pads into the brake caliper.
    • Apply a small about of anti-seize grease to the edges of the pads to get them into the caliper
    • Work the caliper back onto the rotor.
    • Bolt the two 10 mm bolts on the caliper and torque to 20 ft lbs.
  4. step : Put the wheel back on (10:12)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 100 ft lbs
    • Pump the brakes a few times to recompress the caliper pistons.
    • Do a couple 5 to 10 mile an hour stops in the drive way to make sure your brakes are working properly before you road test it.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Satisfied customer
Just as advertised, quality parts, fast shipping and great customer service. Lifelong satisfied 1aauto customer! I would suggest 1aauto to anyone looking for a quality parts and a pleasant experience!
August 28, 2018
Purchased
1 month ago
Works great!
I would recommend this! They work great and are super easy to install! Delivered before ETA!!!
March 22, 2018
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2011Ford Crown Victoria Ford Crown Victoria Rear Brake Rotor Pair Nakamoto
2003-2011Mercury Grand Marquis Mercury Grand Marquis Rear Brake Rotor Pair Nakamoto
2003-2004Mercury Marauder Mercury Marauder Rear Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 3W7Z 2C026 AA
Part #: 1ABFS00240


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 3W7Z 2C026 AA

How-to Video:

(11:10 min)