Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Product Line:   Performance

Specifications:

  • Fits 5 lug
  • 10.2" (259 mm) Solid rotor
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Before touching the brake system, remove the negative battery terminal with a 12mm wrench
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:58)
    • Remove the parking brake cable from the caliper with needle nose pliers
    • Press the clip and remove the caliper from the bracket
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Remove the clip from the brake pads
    • Pry the brake pads off
  3. step : Removing the Brake Rotor (4:32)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (6:21)
    • Remove the brake pad slides
    • Apply grease to the caliper slides
    • Clean the brake pad slides with a wire brush
    • Clip in the brake pad slides
  5. step : Installing the New Brake Rotor (18:47)
    • Clean the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake adjustor
    • Plug on the dust cap
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 42 foot-pounds of torque
  6. step : Installing the New Brake Pads (12:12)
    • Clean the pad surface with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Put an old pad in the caliper
    • Use needle nose pliers to push the pistons back
    • Install the new brake pads into the bracket
    • Apply the clip to the brake pads
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Attach the bracket to the caliper
    • Attach the parking brake cable to the brake caliper with needle nose pliers
  7. step : Reattaching the Wheel (19:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 76 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 21mm wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2011-2014Lexus CT200h Lexus CT200h Rear Brake Rotor for Models with 10.2" (259mm) Diameter Rotors Pair Cross Drilled & Slotted Zinc Coated Performance
2009-2010Pontiac Vibe Pontiac Vibe L4 1.8L Rear Brake Rotor Pair Cross Drilled & Slotted Zinc Coated Performance
2009-2011Toyota Corolla Toyota Corolla XRS Rear Brake Rotor Pair Cross Drilled & Slotted Zinc Coated Performance
2009-2013Toyota Matrix Toyota Matrix L4 1.8L Rear Brake Rotor Pair Cross Drilled & Slotted Zinc Coated Performance
2010-2017Toyota Prius Toyota Prius Rear Brake Rotor Pair Cross Drilled & Slotted Zinc Coated Performance
Part #: 1APBR00435


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(20:43 min)