Part Details

  • Front Brake Rotor Specifications:
    Vented
    5 Lug
    13.58" (345mm)
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Brake Rotor Coating: Zinc Coated
  • Product Line: Performance

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Fits 5 Lug Wheel
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacements
  • 13.58" (345mm) diameter
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:32)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:32)
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside and secure it with a bungee cord
    • Pry the brake pads off with a flat blade screwdriver
    • Remove 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the rotor
    • Pull the rotor off
  3. step : Preparing the New Brake Pads and Rotor (5:54)
    • Clean the surface of the hub with a wire brush
    • Clean the brake pad slides with a wire brush
    • Clean the caliper with a wire brush
    • Apply grease to the caliper slides
    • Clean both sides of the rotor with brake parts cleaner
  4. step : Installing the Brake Pads and Rotor (10:57)
    • Slide the rotor on
    • Tighten the T30 Torx bolt to the rotor
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 166 foot-pounds of torque
    • Add grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp or compressor tool to the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Hold the caliper slide with channel lock pliers
    • Torque bolts to 48 foot-pounds
  5. step : Reattaching the Wheel (16:09)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2014-2016Buick Regal Buick Regal GS Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 13.6" (345mm) Diameter Rotors Performance Nakamoto
2008-2016Cadillac CTS Cadillac CTS Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 13.6" (345mm) Diameter Rotors RPO Code J55 (Heavy Duty Brakes) Performance Nakamoto
2013-2016Cadillac XTS Cadillac XTS Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 13.6" (345mm) Diameter Rotors RPO Code J55 (Heavy Duty Brakes) Performance Nakamoto
2011-2016Chevy Caprice Chevy Caprice Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 55156-DSZ
Part #: 1APBR00426


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 55156-DSZ

How-to Video:

(17:21 min)