These performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
  • 11.9" Diameter Vented Rotors

These brake rotors make a great replacement and are an excellent performance upgrade over your worn original rotors.

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 15 mm caliper bracket bolts.
    • Remove the rotor
  3. step : Install the new disc brakes (4:33)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Mount the caliper bracket and torque the 15 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 35 ft lbs.
  4. step : Mount the wheel (8:17)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2007 Buick Rainier without Sport Package Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto
  • 2006-2009 Chevy Trailblazer Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto
  • 2006 Chevy Trailblazer EXT Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto
  • 2006-2009 GMC Envoy Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto
  • 2006 GMC Envoy XL Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto
  • 2006-2008 Isuzu Ascender Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair L6 4.2L Performance Nakamoto

This part replaces:

  • Nakamoto 55112-DSZ
Part #: 1APBR00092



Nakamoto
Brand #: 55112-DSZ

How-to Video:

(09:17 min)