These front performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 8 Lug Wheel
  • Replaces dealer part numbers: 15942198

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:22)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (2:00)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (7:45)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. step : Put wheel back on (12:50)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (13:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
great customer service
I've ordered from 1aauto before and always received the correct part at a great price. I ordered a pair of front brake rotors and pads for my truck and during the repair found the rotors to be rear rotors and not front. I don't know if they got packaged or labeled wrong somewhere but a quick call to customer service and they emailed me a return label to ship them back at their cost. Thank you for being so easy to work with.
January 18, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(14:05 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket



This part replaces:

  • Nakamoto 55062-DSZ

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2013 Chevy Express 2500 Van Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 8 Lug Wheels Performance Nakamoto
  • 2003-2016 Chevy Express 3500 Van Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Under 9900LB GVW Performance Nakamoto
  • 2004 Chevy Silverado 1500 Crew Cab Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair with 8 Lug Wheels Performance Nakamoto
  • 2001-2003 Chevy Silverado 1500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2006 Chevy Silverado 1500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007 Chevy Silverado 1500 HD Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1999-2004 Chevy Silverado 2500 Cross Drilled & Slotted Brake Rotor Zinc Coated Pair Performance Nakamoto
  • 2001-2004 Chevy Silverado 2500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005 Chevy Silverado 2500 HD Crew Cab Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding 8600LB GVW Performance Nakamoto
  • 2005 Chevy Silverado 2500 HD Front Cross Drilled & Slotted Zinc Coated Pair Brake Rotor excluding Crew Cab Performance Nakamoto
  • 2006-2010 Chevy Silverado 2500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007 Chevy Silverado 2500 HD Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2010 Chevy Silverado 3500 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 9900LB GVW Performance Nakamoto
  • 2007 Chevy Silverado 3500 Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 9900LB GVW Performance Nakamoto
  • 2000-2009 Chevy Suburban 2500 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2003-2016 GMC Savana 2500 Van Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 8 Lug Wheels Performance Nakamoto
  • 2003-2016 GMC Savana 3500 Van Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Under 9900LB GVW Performance Nakamoto
  • 2004 GMC Sierra 1500 Crew Cab Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair with 8 Lug Wheels Performance Nakamoto
  • 2001-2003 GMC Sierra 1500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005-2006 GMC Sierra 1500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007 GMC Sierra 1500 HD Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1999-2004 GMC Sierra 2500 Cross Drilled & Slotted Brake Rotor Zinc Coated Pair Performance Nakamoto
  • 2001-2004 GMC Sierra 2500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005 GMC Sierra 2500 HD Crew Cab Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding 8600LB GVW Performance Nakamoto
  • 2005 GMC Sierra 2500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair excluding Crew Cab Performance Nakamoto
  • 2006-2010 GMC Sierra 2500 HD Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2007 GMC Sierra 2500 HD Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2004-2010 GMC Sierra 3500 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 9900LB GVW Performance Nakamoto
  • 2007 GMC Sierra 3500 Classic Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair 9900LB GVW Performance Nakamoto
  • 2003-2009 Hummer H2 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00016

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 55062-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More