Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Rear Brake Rotor Specifications:
      12.99" (330mm)
      8 Lug
      Vented

This brake rotor pair is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver) & RH (Passenger) Side Rear
  • Replaces dealer part number: 15712801
  • Fits 8 Stud Wheels
  • Rotor Size: 12.99"
  • Center Hub Hole Size: 4.63"

This brake rotor PAIR makes a great replacement and has an excellent value over the price of a dealer brake rotor pair.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:22)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (2:00)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (7:45)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. step : Put wheel back on (12:50)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (13:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2018Chevy Express 2500 Van Chevy Express 2500 Van 8 Lug Wheels Rear Brake Rotor Pair Nakamoto
2003-2018Chevy Express 3500 Van Chevy Express 3500 Van 9.75 Inch Ring Gear with Single Rear Wheels (SRW) Rear Brake Rotor Pair Nakamoto
2004Chevy Silverado 1500 Chevy Silverado 1500 Crew Cab 8 Lug Wheels Rear Brake Rotor Pair Nakamoto
2001-2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD Rear Brake Rotor Pair Nakamoto
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD Rear Brake Rotor Pair Nakamoto
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Rear Brake Rotor Pair Nakamoto
1999-2000Chevy Silverado 2500 Chevy Silverado 2500 without Quadrasteer Rear Brake Rotor Pair Nakamoto
2001-2004Chevy Silverado 2500 Chevy Silverado 2500 (excluding HD Models) without Quadrasteer Rear Brake Rotor Pair Nakamoto
2000-2007Chevy Suburban 2500 Chevy Suburban 2500 Rear Brake Rotor Pair Nakamoto
2003-2018GMC Savana 2500 Van GMC Savana 2500 Van 8 Lug Wheels Rear Brake Rotor Pair Nakamoto
2003-2018GMC Savana 3500 Van GMC Savana 3500 Van 9.75 Inch Ring Gear with Single Rear Wheels (SRW) Rear Brake Rotor Pair Nakamoto
2004GMC Sierra 1500 GMC Sierra 1500 Crew Cab 8 Lug Wheels Rear Brake Rotor Pair Nakamoto
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Brake Rotor Pair Nakamoto
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Brake Rotor Pair Nakamoto
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Rear Brake Rotor Pair Nakamoto
1999-2000GMC Sierra 2500 GMC Sierra 2500 without Quadrasteer Rear Brake Rotor Pair Nakamoto
2001-2004GMC Sierra 2500 GMC Sierra 2500 (excluding HD Models) without Quadrasteer Rear Brake Rotor Pair Nakamoto
2000-2007GMC Yukon XL 2500 GMC Yukon XL 2500 Rear Brake Rotor Pair Nakamoto
2003-2009Hummer H2 Hummer H2 Rear Brake Rotor Pair Nakamoto
Part #: 1ABFS00168


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 55057

How-to Video:

(14:05 min)