These performance brake rotors are just what you need to get your vehicle stopping great again!

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • 11.92" Diameter
  • Vented

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts.
    • Jack up the car and remove the wheel.
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper.
    • Undo the two 15 mm bolts on the back of the caliper.
    • Pull caliper off, using a screw driver to pry it off if necessary.
    • Secure caliper bracket safely to avoid stressing the brake line.
  2. step : Step 2: Removing the Caliper Bracket and rotor (3:08)
    • Pry brake pads out of the caliper bracket.
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage).
    • Remove bracket and rotor.
  3. step : Step 3: Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut.
    • Replace the caliper bracket and tighten bolts to 90ft/lbs.
    • Remove caliper bracket slides and clean with a wire brush.
    • Slide brake pads into place.
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper.
    • Place the caliper back on to the bracket.
    • Clean caliper bolts and add small amount of oil.
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Recommended
These rotors fit well, and I have been driving on them for a few weeks now. They seem of decent quality and I am satisfied at this great price.
February 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:13 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto 55034-DSZ

Vehicle Fit

  • 2000-2004 Buick LeSabre Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 16 Inch Wheels Performance Nakamoto
  • 2005 Buick LeSabre Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with 16 Inch Wheels (Built Before VIN 5U129026) Performance Nakamoto
  • 1997-2004 Buick Park Avenue Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005 Buick Park Avenue Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair (Built Before VIN 5U129026) Performance Nakamoto
  • 1997-1999 Buick Riviera Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1997-2004 Cadillac Deville Front Cross Drilled & Slotted Zinc Coated Brake Rotor for Models with Rear Disc Brakes Pair Performance Nakamoto
  • 2005 Cadillac Deville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with Rear Disc Brakes (Built Before VIN 5U129030) Performance Nakamoto
  • 1997-2002 Cadillac Eldorado Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1997-2004 Cadillac Seville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1998-2002 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2000-2004 Chevy Impala Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005 Chevy Impala Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair (Built Before VIN 59148924) Performance Nakamoto
  • 2000-2004 Chevy Monte Carlo Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1997-1999 Olds Aurora Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2001-2003 Olds Aurora Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1998-1999 Olds Intrigue Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with RPO Code JA9 (Heavy Duty Brakes) Performance Nakamoto
  • 2000-2003 Pontiac Bonneville SSEi Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2000-2004 Pontiac Bonneville SLE Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 2005 Pontiac Bonneville SLE Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair (Built Before VIN 5U129028) Performance Nakamoto
  • 1998-2002 Pontiac Firebird Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
Part #: 1APBR00001

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 55034-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More