Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fit 5 Lug Wheels
  • Direct replacement
  • 10.94" (277mm) diameter
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 10.94" (278mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:58)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:14)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads and Rotor (1:39)
    • Remove the 3/8 inch Allen bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Use a large C-clamp to push the pistons back
    • Remove the Allen bolts
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the bolts
    • Pull the rotor off
  4. step : Installing the New Brake Pads and Rotor (4:19)
    • Slide the rotor on
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the Allen bolts by hand
  5. step : Reattaching the Wheel (5:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  6. step : Testing the Brakes (5:47)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1997 Buick LeSabre Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1991-1996 Buick Park Avenue Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1996 Buick Riviera Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1990 Cadillac Deville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
  • 1991-1993 Cadillac Deville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1990 Cadillac Fleetwood Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair for Models with ABS Brakes Performance Nakamoto
  • 1991-1993 Cadillac Fleetwood Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1996 Cadillac Seville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1993-1997 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1996 Chevy Lumina APV Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1997 Olds 88 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1991-1996 Olds 98 Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1995-1996 Olds Aurora Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1996 Olds Silhouette Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1997 Pontiac Bonneville Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1993-1997 Pontiac Firebird Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto
  • 1992-1996 Pontiac Trans Sport Front Cross Drilled & Slotted Zinc Coated Brake Rotor Pair Performance Nakamoto

This part replaces:

  • Nakamoto 55014-DSZ
Part #: 1APBR00169

Nakamoto
Brand #: 55014-DSZ

How-to Video:

(06:13 min)